94 cobra intake installation!!!!!!!!!!

boricua_5litro · 02-19-2001, 03:44 PM

Hey, I just purchased a cobra intake edelbrock 65 throttle body and 75 MAF for the 94-95 model. My question is, How hard is it to do the installation. I have heard that its hard because of the injectors. I am being charged 250-450$ for the job. Is it worth that much. Thanks.

AtaxicStanger · 02-19-2001, 06:43 PM

I have installed/reinstalled mine many times. The price seems high. Removing and installing the injectors is easy.

The last time I did mine, it took about 2.5 hours total and that was working slowly. It was hot outside!

------------------
95 GT, GT40 Aluminum Heads, Intake u/l, 9# Powerdyne SC, 65 mm FMS TB, 70 mm FMS MAS, 30 lb injectors, E303 cam, Hooker Super Comp equal shorty headers, H pipe, Flows, Nitto DR, MSD BTM, Adjustable FP reg, 255 fuel pump, Autometer gauge pod with Electric FP guage and Boost guage, a few other odds and ends

joe4speed · 02-19-2001, 06:49 PM

Very easy to do yourself... I had never done one before I did my cobra intake that I have now and it was really straight forward... If in doubt, get a chiltons book for reference... I've had mine off and on a few times as well.. Good luck!

------------------
Joe!
1988 GT, 167,000 miles!!! 13.71@105mph Check out my listing! Click here! Or my website:
www.joe4speed.com
1999 Ninja ZX-6R 10.32@135mph!

rtz · 02-20-2001, 01:54 AM

It's easy work, it just takes some time.

Patrick Boetticher · 02-20-2001, 12:16 PM

VERY easy!!! about 3 hours if it is your first time... the injectors are a walk in the park copared to every thing else...

02-19-2001, 03:44 PM	#1
boricua_5litro Registered Member Join Date: Jan 2001 Location: daleville al Posts: 26	94 cobra intake installation!!!!!!!!!! Hey, I just purchased a cobra intake edelbrock 65 throttle body and 75 MAF for the 94-95 model. My question is, How hard is it to do the installation. I have heard that its hard because of the injectors. I am being charged 250-450$ for the job. Is it worth that much. Thanks.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
cobra tb to intake studs	scale	Windsor Power	1	04-18-2003 11:03 AM
cobra intake	scale	Windsor Power	1	04-07-2003 11:36 PM
Speed Secret # 3	jim_howard_pdx	Windsor Power	13	11-09-2002 10:35 AM
Cobra Intake?	95mustanggt	Windsor Power	5	10-01-2002 09:55 AM
sn95 Cobra intake vs older sn93 Cobra intake	Fordman50	Windsor Power	2	03-17-2001 01:09 AM

02-19-2001, 06:43 PM	#2
AtaxicStanger Registered Member Join Date: Jan 2000 Location: Waukesha, WI Posts: 59	I have installed/reinstalled mine many times. The price seems high. Removing and installing the injectors is easy. The last time I did mine, it took about 2.5 hours total and that was working slowly. It was hot outside! ------------------ 95 GT, GT40 Aluminum Heads, Intake u/l, 9# Powerdyne SC, 65 mm FMS TB, 70 mm FMS MAS, 30 lb injectors, E303 cam, Hooker Super Comp equal shorty headers, H pipe, Flows, Nitto DR, MSD BTM, Adjustable FP reg, 255 fuel pump, Autometer gauge pod with Electric FP guage and Boost guage, a few other odds and ends

02-19-2001, 06:49 PM	#3
joe4speed He said Member...heh, heh Join Date: Sep 1999 Location: Jupiter, Florida U.S.A. Posts: 3,718	Very easy to do yourself... I had never done one before I did my cobra intake that I have now and it was really straight forward... If in doubt, get a chiltons book for reference... I've had mine off and on a few times as well.. Good luck! ------------------ Joe! 1988 GT, 167,000 miles!!! 13.71@105mph Check out my listing! Click here! Or my website: www.joe4speed.com 1999 Ninja ZX-6R 10.32@135mph!

02-20-2001, 01:54 AM	#4
rtz Registered Member Join Date: Feb 2001 Location: Edmond, OK Posts: 180	It's easy work, it just takes some time.

02-20-2001, 12:16 PM	#5
Patrick Boetticher Registered Member Join Date: Feb 1999 Location: Camarillo/Thousand Oaks Ca Posts: 223	VERY easy!!! about 3 hours if it is your first time... the injectors are a walk in the park copared to every thing else...