Quote:
Originally posted by 5.0 HO:
Make sure that the end of the springs are all facing the same way or that will cause a difference in ride height.
The end of the spring at the bottom you have to make sure that they are facing the same way on both sides.
Hope this helps.. 
|
Yep, he's right. Check that first a buddy of mine had his installed at a shop and they did them wrong, we had to pull it apart and fix them.
------------------
Check Out My Site 91GT,Holley SysteMAX II Kit-Heads 2.02" x 1.60" port matched to a 1262,Anderson N-61,24#,76mm C&L,Full MAC exhaust 1-5/8" Long tubes,2-1/2" O.R H-Pipe,2 1/2" cat back, No A/C or PS or emissions, 12" K&N Filter,RNH PERFORMANCE Ram Air,Ron Davis Radiator,Full Suspension, SPEC stage III clutch, Lakewood SFI bell, S&W 8pt "X" brace,JAZ seats,3:73's,Welds..etc,4:30's and 31 splines coming very soon! <B