MustangWorks.com : Ford Forums - View Single Post

toevil1 · 07-14-2005, 02:09 AM

I was also told that the A/F ratio meter is not very accurate. Wish I would of known this before wasted money on it.

Your idle problem sounds similar to a problem I had after I had an E-cam installed. It would stall untill I installed the idle spacer. I still had an erratic idle.

I finally took it to the dyno shop to get tuned. The guy said that I did not need that spacer because he was going to properly tune the computer for my combination. It ran like a champ afterwords with no idle problems.

Sounds like you need to have a chip burned for you combintion. They should be able to fix your prolems with a new tune.

07-14-2005, 02:09 AM	#8
toevil1 Registered Member Join Date: Sep 2002 Location: Los Angeles Posts: 39	Re: car won't start after head reinstall I was also told that the A/F ratio meter is not very accurate. Wish I would of known this before wasted money on it. Your idle problem sounds similar to a problem I had after I had an E-cam installed. It would stall untill I installed the idle spacer. I still had an erratic idle. I finally took it to the dyno shop to get tuned. The guy said that I did not need that spacer because he was going to properly tune the computer for my combination. It ran like a champ afterwords with no idle problems. Sounds like you need to have a chip burned for you combintion. They should be able to fix your prolems with a new tune.