'65 Carb Question

Wendell Allen · 07-09-2002, 03:29 PM

I'm working on a '65, 200ci 6 banger. The carb that's on the car, and the original one as far as I can tell, has "DOPF-9510 K" and "4329-1 1714" on the side of the carb.

My problem is in finding a rebuild kit for it. All the ones I've looked at so far have the wrong gaskets for the body of the carb, as well as small carb/intake gaskets. And of course Ford doesn't list a kit for this dude any more.

The carb on the car has two floats in it, even though it's only a one barrell carb. There is one float on each side of the carb inlet (slightly offset from the inlet itself). But the kits I've looked at have much smaller housing gaskets. They appear to me as though they're for carbs that have only one float.

Anyone been through this before? And if so, what did you do to get the right one?

Thanks in advance!

Wendell Allen

Wendell Allen · 07-10-2002, 11:55 AM

I'm countin' on ya. Even if you don't know the answer, do you know of anyone who specializes in Mustang carb repair/restoration that might be able to help me?

red · 07-10-2002, 04:14 PM

try pony carburetors

I think carbs with the 9510 group number were pre 1957 or pre carb tag carburetors.

Good Luck

-JON

PKRWUD · 07-13-2002, 04:54 AM

I'd go to a good autoparts place like a high volume
NAPA with these numbers(I'd even bring the carb too)
so that they can match it. Standard (now called
"Hygrade") makes good kits and provides them
a good catalog.

Take care,
-Chris

07-09-2002, 03:29 PM	#1
Wendell Allen Registered Member Join Date: Jul 2002 Location: Houston, Texas Posts: 13	'65 Carb Question I'm working on a '65, 200ci 6 banger. The carb that's on the car, and the original one as far as I can tell, has "DOPF-9510 K" and "4329-1 1714" on the side of the carb. My problem is in finding a rebuild kit for it. All the ones I've looked at so far have the wrong gaskets for the body of the carb, as well as small carb/intake gaskets. And of course Ford doesn't list a kit for this dude any more. The carb on the car has two floats in it, even though it's only a one barrell carb. There is one float on each side of the carb inlet (slightly offset from the inlet itself). But the kits I've looked at have much smaller housing gaskets. They appear to me as though they're for carbs that have only one float. Anyone been through this before? And if so, what did you do to get the right one? Thanks in advance! Wendell Allen

07-10-2002, 11:55 AM	#2
Wendell Allen Registered Member Join Date: Jul 2002 Location: Houston, Texas Posts: 13	Come on, guys and gals...... I'm countin' on ya. Even if you don't know the answer, do you know of anyone who specializes in Mustang carb repair/restoration that might be able to help me?

07-13-2002, 04:54 AM	#4
PKRWUD Junior Member Join Date: Mar 1999 Location: Ventura, California Posts: 8,981	I'd go to a good autoparts place like a high volume NAPA with these numbers(I'd even bring the carb too) so that they can match it. Standard (now called "Hygrade") makes good kits and provides them a good catalog. Take care, -Chris __________________ Webmaster: Rice Haters Club Jim Porter Racing Peckerwoods Pit Stop Support Your Local RED & WHITE!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
EFI to Carb question	RoushRacing6N17	Windsor Power	3	12-15-2003 10:59 AM
question for carb guys	fiveOguy20	Windsor Power	6	05-30-2003 10:33 PM
funny carb. question.	66StangGuy	Classic Mustangs	0	12-29-2002 04:50 AM
to carb, or not to carb...this is my question.	black86notch	Windsor Power	4	08-06-2002 08:24 PM
90 5.0 EFI to carb question	LX XLR8R	Windsor Power	4	06-01-2001 05:29 PM

07-10-2002, 04:14 PM	#3
red Registered Member Join Date: Sep 1998 Location: Millburn, NJ Posts: 310	try pony carburetors I think carbs with the 9510 group number were pre 1957 or pre carb tag carburetors. Good Luck -JON