How about the 51025 Lunati?.

02-25-2001, 11:08 PM

the 51025 has 224/232 duration and 535/545 lift how will this cam do with 10:1 compression and edelbrokRPM's with 2.02 valves and a 4.10 5 speed would this cam be better than the 51024 lunati?
need advice soon!! thanks guys

------------------
SOLD THE 87GT, 83 Hatch EFI converted.
Cobra shortblcok with TFS heads, E-303 cam, GT40 intake 65mm TB and 75 bullet TKO tranny 3.73 gears ROH wheels, and ALWAYS a 150 shot of Compucar

02-28-2001, 04:20 PM

ok guys nobody on here has any input on this CAM i am definitly going with the 51025 its installed. looked as though it made a lil more HP and alot more TQ. than the 51014.. THANXS

------------------
SOLD THE 87GT, 83 Hatch EFI converted.
Cobra shortblcok with TFS heads, E-303 cam, GT40 intake 65mm TB and 75 bullet TKO tranny 3.73 gears ROH wheels, and ALWAYS a 150 shot of Compucar

stangbang · 02-28-2001, 07:49 PM

I haven't heard too much about this cam either but I would like to use it in the 347 stroker I am building.Once you get it in and runnin let me know what you think of it.

Five0 · 03-01-2001, 04:48 PM

Thats real close to the specs on my cam.
It should be good to 6500 rpm's.

BTW: I like mine, I think you will like it.

------------------
James Cox
nochevy@hotmail.com
1991 Mustang LX
12.565 @109.38mph 1.764 60ft

02-25-2001, 11:08 PM	#1
87GTman Guest Posts: n/a	How about the 51025 Lunati?. the 51025 has 224/232 duration and 535/545 lift how will this cam do with 10:1 compression and edelbrokRPM's with 2.02 valves and a 4.10 5 speed would this cam be better than the 51024 lunati? need advice soon!! thanks guys ------------------ SOLD THE 87GT, 83 Hatch EFI converted. Cobra shortblcok with TFS heads, E-303 cam, GT40 intake 65mm TB and 75 bullet TKO tranny 3.73 gears ROH wheels, and ALWAYS a 150 shot of Compucar

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Help me with this engine delima.. please	NewAge 5.0	Windsor Power	3	05-16-2002 09:06 AM
Cheap Power!	RPM427	Windsor Power	6	03-01-2002 12:54 AM
Lunati 51014 cam questions	87GTman	Windsor Power	4	02-26-2001 10:49 PM

02-28-2001, 04:20 PM	#2
87GTman Guest Posts: n/a	ok guys nobody on here has any input on this CAM i am definitly going with the 51025 its installed. looked as though it made a lil more HP and alot more TQ. than the 51014.. THANXS ------------------ SOLD THE 87GT, 83 Hatch EFI converted. Cobra shortblcok with TFS heads, E-303 cam, GT40 intake 65mm TB and 75 bullet TKO tranny 3.73 gears ROH wheels, and ALWAYS a 150 shot of Compucar

02-28-2001, 07:49 PM	#3
stangbang Registered Member Join Date: Oct 1999 Location: brunswick,ohio Posts: 135	I haven't heard too much about this cam either but I would like to use it in the 347 stroker I am building.Once you get it in and runnin let me know what you think of it.

03-01-2001, 04:48 PM	#4
Five0 Registered Member Join Date: Apr 2000 Location: middleburg, fl, usa Posts: 1,134	Thats real close to the specs on my cam. It should be good to 6500 rpm's. BTW: I like mine, I think you will like it. ------------------ James Cox nochevy@hotmail.com 1991 Mustang LX 12.565 @109.38mph 1.764 60ft