MustangWorks.com : Ford Forums - View Single Post

moosejaw · 03-05-2001, 01:14 AM

Use same struts. If you use 86 ball joints then a 1/4" spacer is required under the ball joint fastener. If you use a 94 and up ball joint this is not req'd. The newer ball joints have a slightly shorter height.

Are you also changing the rears to Disc? If so, get the 94 and up booster, master cylinder and proportioning valve (or equivelant).

Mike

------------------
Live near St.Louis?
Check out Mustang Muscle and Dyno in High Ridge, MO
Check out my ride.

03-05-2001, 01:14 AM	#4
moosejaw Registered Member Join Date: Apr 1999 Location: St.Louis,MO Posts: 274	Use same struts. If you use 86 ball joints then a 1/4" spacer is required under the ball joint fastener. If you use a 94 and up ball joint this is not req'd. The newer ball joints have a slightly shorter height. Are you also changing the rears to Disc? If so, get the 94 and up booster, master cylinder and proportioning valve (or equivelant). Mike ------------------ Live near St.Louis? Check out Mustang Muscle and Dyno in High Ridge, MO Check out my ride.