cheap mafs at vortech

7up · 02-05-2002, 02:16 PM

I have been looking into getting a mass air, either a 73mm or a 76mm. I noticed Vortech is selling the 73mm for $120 while other places are selling for around $150. They also sell the 80mm for $142 while others sell it for around $200. I was thinking about getting the 76mm, but Vortech does not sell it. Jd's performance sells it for $205 and they sell the 80mm for $200.

I am wondering why Vortech is so much cheaper on the MAF's they sell and why the 76mm is more expensive than the 80mm? Also is there any drawback to getting a bigger MAF such as the 80mm compared the 76mm?

Right now I have a vortech a-trim(5 psi) and Flowmaster catback. I plan on getting 30lb injectors and a 255 fuel pump along with the Maf. Any help would be appreciated.

avbcon12 · 02-05-2002, 03:14 PM

C&L makes the vortech MAF sensor for them. they are the same as the C&L. i am going to get the 73mm.
i think vortech doesnt sell the 76mm because that is what C&L is trying to market right now...

im not sure which size would be good for you because i do not do power adders, but just to let you know that they vortechs ARE C&L.

hope it helps,
adam

02-05-2002, 02:16 PM	#1
7up Registered Member Join Date: Feb 2002 Location: Greeley, Colorado Posts: 321	cheap mafs at vortech I have been looking into getting a mass air, either a 73mm or a 76mm. I noticed Vortech is selling the 73mm for $120 while other places are selling for around $150. They also sell the 80mm for $142 while others sell it for around $200. I was thinking about getting the 76mm, but Vortech does not sell it. Jd's performance sells it for $205 and they sell the 80mm for $200. I am wondering why Vortech is so much cheaper on the MAF's they sell and why the 76mm is more expensive than the 80mm? Also is there any drawback to getting a bigger MAF such as the 80mm compared the 76mm? Right now I have a vortech a-trim(5 psi) and Flowmaster catback. I plan on getting 30lb injectors and a 255 fuel pump along with the Maf. Any help would be appreciated.

02-05-2002, 03:14 PM	#2
avbcon12 Registered Member Join Date: Jul 2001 Location: West Bloomfield, MI Posts: 391	C&L makes the vortech MAF sensor for them. they are the same as the C&L. i am going to get the 73mm. i think vortech doesnt sell the 76mm because that is what C&L is trying to market right now... im not sure which size would be good for you because i do not do power adders, but just to let you know that they vortechs ARE C&L. hope it helps, adam __________________ 90 GT black/ grey leather ported GT-40 heads w/ 1.7RR, Cobra intake w/ ported lower, 24# injectors, 190LPH pump, 75mm Pro-M MAF, 65mm TB, K&N panel, BBK long tubes, Off road H-pipe, 2 ch. Flowmaster, Black magic fan, Kirban FPR, 180 deg. T-stat, 3.73's, Steeda Tri-Ax, 130 amp alt. Accell 8.8 race wires/cap/rotor, motorcraft plugs, Factory Five suspension, etc etc etc.... http://avbcon12.stangnet.com

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Good, cheap place to get hoods and wings?	Chris41279	Appearance & Detailing	2	07-16-2004 01:26 AM
Vortech Supercharger	-viscid-01-GT-	Modular Madness	5	05-09-2003 11:53 AM
Cheap Cheap Porting Would it work?	vetteeatr	Blue Oval Lounge	1	11-02-2002 10:34 AM
Vortech mass air flow	danjmorris	Windsor Power	1	02-25-2001 06:09 PM
351 stroked to 408 + a Vortech S-trim@14# boost, good or bad?	bigwhitecobra	Windsor Power	4	02-02-2001 11:16 AM