What Clutch Disc?

MustangDanny · 12-20-2001, 11:49 AM

I want to put a new clutch disk in when I rebuild this winter. What would be a good disk to go with my Ford HD clutch kit? This one slips like nuts but mostly becuase the engine leaks oil on to it.

fiveohpatrol · 12-20-2001, 12:00 PM

LOL, yah oil on the clutch disk would cause it to slip just a little

Are you planning on alot of power? I love my motorsport HD clutch and would reccomend it to anyone running low 13's or slower. Faster than that you'll probably want a more aggressive one.

MustangDanny · 12-20-2001, 12:09 PM

Well my short term gaol is 300 rwhp

Paluka21 · 12-20-2001, 10:10 PM

Might wanna look at spec clutches bro.

you say your goal is 300rwhp, well so was mine, then it was 400, then 500..hehe. Id say go for a spec stage II, its built for slicks incase you wanna run them as well. Well built for slicks at the power level your speaking of and can handle over 400rwhp. http://www.specpwr.com/
good luck
Dan
95 rio red cobra #2021

12-20-2001, 11:49 AM	#1
MustangDanny Registered Member Join Date: Nov 2001 Location: Dover, DE Posts: 70	What Clutch Disc? I want to put a new clutch disk in when I rebuild this winter. What would be a good disk to go with my Ford HD clutch kit? This one slips like nuts but mostly becuase the engine leaks oil on to it. __________________ -- -1991 LX 5.0 Sedan, 5 spd (new 'Z' tranny), 3.73, aluminum DS, Hedman headers, 190 LPH, MAC CAI, Flowmaster catback. (170K miles on motor) Best ET: 14.434 @ 96.04 MPH - 2.205 60' (Radials) My Notch

12-20-2001, 12:09 PM	#3
MustangDanny Registered Member Join Date: Nov 2001 Location: Dover, DE Posts: 70	Well my short term gaol is 300 rwhp __________________ -- -1991 LX 5.0 Sedan, 5 spd (new 'Z' tranny), 3.73, aluminum DS, Hedman headers, 190 LPH, MAC CAI, Flowmaster catback. (170K miles on motor) Best ET: 14.434 @ 96.04 MPH - 2.205 60' (Radials) My Notch

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
T-5 swap & cable clutch problem	LuvMyStang	Classic Mustangs	0	03-19-2003 08:47 AM
'65 - Pull Away Problems - Action Plan	geordie	Classic Mustangs	0	05-14-2002 01:43 PM
'65 Mustang - Pull Away Problems	geordie	Classic Mustangs	6	05-11-2002 04:46 PM
billed 5 times to install clutch by Pauls Auto, please read and give opinions (long)	beefcake	Blue Oval Lounge	2	02-23-2001 03:05 PM
clutch disc sticks to flywheel	GMSMOKER	Classic Mustangs	3	08-13-2000 02:38 PM

12-20-2001, 12:00 PM	#2
fiveohpatrol I'd rather be basketweaving Join Date: Feb 2000 Location: Indianapolis Posts: 2,551	LOL, yah oil on the clutch disk would cause it to slip just a little Are you planning on alot of power? I love my motorsport HD clutch and would reccomend it to anyone running low 13's or slower. Faster than that you'll probably want a more aggressive one. __________________ NMRA O/C 9516 NA pumpgas stickshift 347 10.65@125.6, 6.73@100, 1.41 60ft

12-20-2001, 10:10 PM	#4
Paluka21 Registered Member Join Date: Oct 2000 Location: Maryland Posts: 71	Might wanna look at spec clutches bro. you say your goal is 300rwhp, well so was mine, then it was 400, then 500..hehe. Id say go for a spec stage II, its built for slicks incase you wanna run them as well. Well built for slicks at the power level your speaking of and can handle over 400rwhp. http://www.specpwr.com/ good luck Dan 95 rio red cobra #2021