MustangWorks.com : Ford Forums - View Single Post - Clutch slipping after 300-500mi of Quadrant and cable swap

bailey_57 · 08-29-2007, 10:04 PM

ski,
my .02 is that with what you described(i recently installed the steeda kit on my 89) it sounds like you probably overtightened the cable. are you sure the play you felt wasn't slack between the quadrant and washer. i think you should go to next stage if you are running squeeze. my buddy also smoked a stage 1 on a brand x making 330 wheel horse. he replaced it with another kit. hope this helps.

08-29-2007, 10:04 PM	#2
bailey_57 Registered Member Join Date: Mar 2000 Location: Berwick,Pa Posts: 127	Re: Clutch slipping after 300-500mi of Quadrant and cable swap ski, my .02 is that with what you described(i recently installed the steeda kit on my 89) it sounds like you probably overtightened the cable. are you sure the play you felt wasn't slack between the quadrant and washer. i think you should go to next stage if you are running squeeze. my buddy also smoked a stage 1 on a brand x making 330 wheel horse. he replaced it with another kit. hope this helps. __________________ '89 GT hatch back performer rpm intake, performer rpm cylinder heads, fms e-303 cam, kirban adj fp regulator, holley 65mm tb, harland sharp 1.6 roller rockers, alum driveshaft, 3.73 gears (283 rwhp, 303 rwtq new numbers with new heads)