About the clutch, always have the flywheel machined while you have the tranny out of the car and the clutch replaced. That's why you have chatter problems most likely. The steering prob might not be the rack, could be tie rods, tie rod ends, bushings, etc. But if it is the rack, I don't know anything about auto parts store steering racks, good luck though man.
__________________
Michael Black
QuantumMotorsports
Norman, OK
1984 LX Hatch
306 w/ TRW forged flat toppers, Comp Cams Magnum 292H, GT40P heads w/ 3 angle valve job, .550 lift springs, Angus Racing Roller Rockers, Weiand Stealth Intake, Holley 4150 650cfm carb, MAC 1 5/8 Long Tubes, Single Chamber Flowmasters, 91' T5 w/ Pro 5.0 shifter, Turbo Coupe 8.8 Rear w/ 3.55 gears, QA1 Motorsports tubular K member, no interior except steering wheel and seat.
Coming soon: 6 or 8 point cage, Fuel Cell, Weld Draglites
|