MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Tech > Windsor Power
Register FAQ Members List Calendar

Notices


 
 
Thread Tools Rate Thread Display Modes
Prev Previous Post   Next Post Next
Old 07-13-2003, 01:17 AM   #1
Coupe50h
Registered Member
 
Coupe50h's Avatar
 
Join Date: Aug 2002
Location: SanAntonio, Tx
Posts: 957
Unhappy Clutch wont hold no more? question..

I have a kk clutch and pp, last night at the track i went 13.0@ 105 with a slipping clutch, i was launching at 5k, wich im sure hurt this clutch, i hot lapped it and went 13.0 104, then 13.3 103, my 60's were not good as i had in the past, best i did was 1.86 then they got worse.
I could tell something was wrong, well today i get in my car and drive down the street, in 4th gear at a low speed, i can push the gas, and the rpms will jump around?
Now my question is, i have an old motorsport disc laying around, it still has lots of life left on it, i took it out for my t-5 rebuild with low miles, but could i just throw that in, and of course resurface the flywheel first? or will the pp have a different wear pattern, and chatter? because I would rather keep the kk pp if ya know what i mean, the hd motorsports are hard to push in.
I dont have the cash for a df setup right now.....whaddaya think guys? thanx.
__________________
X-Texas highway patrol ssp 1990 coupe - exploder Gt-40 iron heads, Explorer intake, 19 lber's. E-cam. crane 1.7 rollers. 190fp. 75mm maf. 65mm tb, tubular subframe connectors, mac cai, Asp crank pulley, T-5, king cobra clutch, flowtech 1-5/8 unequals, mac X-pipe Frpp driveshaft, lakewood Lca's.
race weight 3,160

12.69 @ 107.35, 1.71 60' 26x8.5 drag's 3.90 gear

13.20 @ 106.91 - 235/60/15 firestones 2.3 60' 3.27 gear
Coupe50h is offline   Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Clutch Release lever Spring Question orlowted Classic Mustangs 2 12-22-2003 06:32 PM
Hi! Newbiew w/ a 5.0 flywheel clutch question! Beanhead Windsor Power 10 11-01-2002 07:15 PM
clutch question stang_guy_95 Windsor Power 2 07-31-2002 10:34 PM
billed 5 times to install clutch by Pauls Auto, please read and give opinions (long) beefcake Blue Oval Lounge 2 02-23-2001 03:05 PM
Question on Clutch Adjustment? 88GStangT Windsor Power 4 02-09-2001 11:25 AM


All times are GMT -5. The time now is 05:19 PM.


SEARCH