cobra intake
can i use my stock throttle body, tps and all that jazz? I am not sure what the stock opening is on a 93 cobra intake. I have heard it is 65mm but am not sure (not sure what a standard tb size is...60mm?). If that is the case and i get a 65mm tb will i have to get a different tps? massair meter ...or anything else?
Also does anyone know where to pick up a set of upper to lower bolts for the intakes. I dont have them. I am assuming the lower intake bolts are the same as any old intake...cobra or not. Ill just use my old ones from my LX lower instake. Thanks |
Yes the stock throttle body will work. 55mm is the stock size. Cobra had a 65mm t-body. The same T.P. sensor works. Do not have to use a different MAF if same injectors. The lower intake bolts will work. You will need a few different upper intake bolts. A good hardware store or other specialty bolt and supply house will be able to get you the right lenght upper bolts.
|
All times are GMT -5. The time now is 04:44 PM. |