Cobra Questions

86StangGT · 07-28-2001, 10:40 AM

I might me buying a white 95 Cobra, and was wondering some things about it. I know it has the GT-40 cobra motor in it, that claimed to have 240 HP but its really a little bit higher than that. But what about the gears, I think they are 3.27's but I'm not sure. Does anybody know anything else about this year cobra that makes it a little bit more special than a GT. What about 1/4 mile times?????

TEXSN95 · 07-28-2001, 04:17 PM

Differences from the GT:

Exterior:
Round foglights, badass spoiler with brake light, different wheels with 255/45/17s, clear headlights, "mustang" on bumper, "SVT" on decklid, red, white, black only

Interior:
White gauges w/ 160 speedo, leather E brake handle and shift knob and boot, lightweight seat frames, cobra floor mats, "cobra" on steering wheel, only available in black @ tan

Engine:
24lb squirters, GT40 Iron heads, 1.7 rockers, Cobra intake, oil cooler, special (crappy) EEC calibration for 19 lb squirters, no strut tower brace :-(, about 260-265 hp and 14.4 @ 98 or so bone stock.

Suspension:
Softer springs, smaller front swaybar, 13/11.65 brakes :-)

It has an ugraded tranny, and only 308s were offered, and is the most limited run of the yearly cobras at 4005 coupes and 500 hard top converts. That's the abbreviated version...click the link for the detailed info. http://home.fuse.net/94Cobra/mycobra.html
Only difference in the 94s is that they didnt have the SVT on the decklid.

------------------
Clint L.
White 95 Cobra #3637
58cc GT40X heads with mild porting, Crane 2031 cam, FRPP 65 TB, 1.7s, Cobra intake, homeade cold air, 155lph, pullies, Tokico Illuminas, C springs, GW LCAs, Kenny Brown super subs, Steeda CC plates, aluminum driveshaft, Steeda quadrant, B&M ripper, Kirban FPR, MSD6A, Taylor wires, Mac shorties, off road hpipe, 2 1/2 ultra flows w/ dumps, R hood, Euro clear corners, stock 3.08s
13.61 @ 105.7 w/ 2.22

[This message has been edited by TEXSN95 (edited 07-28-2001).]

07-28-2001, 10:40 AM	#1
86StangGT Registered Member Join Date: Dec 2000 Location: slidell, La Posts: 73	Cobra Questions I might me buying a white 95 Cobra, and was wondering some things about it. I know it has the GT-40 cobra motor in it, that claimed to have 240 HP but its really a little bit higher than that. But what about the gears, I think they are 3.27's but I'm not sure. Does anybody know anything else about this year cobra that makes it a little bit more special than a GT. What about 1/4 mile times?????

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Questions on 1993 Cobra rims	GLSnXR5guy	Windsor Power	0	11-03-2002 07:39 PM
Raced a 02' Saleen, 01' cobra, and a freaky LS-1.	Dark_5.0	Stang Stories	29	08-23-2002 07:12 PM
Acura Cl-S says he beat a cobra?	Coupe5oh	Stang Stories	11	07-29-2002 04:27 PM
2003 Cobra Buyer Beware!!	Doug McGinn	Modular Madness	16	07-25-2002 08:26 AM
New ET 11.457 @ 123.63 in a 99 Cobra!	beefcake	Modular Madness	1	09-25-2000 11:47 AM

07-28-2001, 04:17 PM	#2
TEXSN95 Registered Member Join Date: Mar 2001 Location: college station, tx Posts: 143	Differences from the GT: Exterior: Round foglights, badass spoiler with brake light, different wheels with 255/45/17s, clear headlights, "mustang" on bumper, "SVT" on decklid, red, white, black only Interior: White gauges w/ 160 speedo, leather E brake handle and shift knob and boot, lightweight seat frames, cobra floor mats, "cobra" on steering wheel, only available in black @ tan Engine: 24lb squirters, GT40 Iron heads, 1.7 rockers, Cobra intake, oil cooler, special (crappy) EEC calibration for 19 lb squirters, no strut tower brace :-(, about 260-265 hp and 14.4 @ 98 or so bone stock. Suspension: Softer springs, smaller front swaybar, 13/11.65 brakes :-) It has an ugraded tranny, and only 308s were offered, and is the most limited run of the yearly cobras at 4005 coupes and 500 hard top converts. That's the abbreviated version...click the link for the detailed info. http://home.fuse.net/94Cobra/mycobra.html Only difference in the 94s is that they didnt have the SVT on the decklid. ------------------ Clint L. White 95 Cobra #3637 58cc GT40X heads with mild porting, Crane 2031 cam, FRPP 65 TB, 1.7s, Cobra intake, homeade cold air, 155lph, pullies, Tokico Illuminas, C springs, GW LCAs, Kenny Brown super subs, Steeda CC plates, aluminum driveshaft, Steeda quadrant, B&M ripper, Kirban FPR, MSD6A, Taylor wires, Mac shorties, off road hpipe, 2 1/2 ultra flows w/ dumps, R hood, Euro clear corners, stock 3.08s 13.61 @ 105.7 w/ 2.22 [This message has been edited by TEXSN95 (edited 07-28-2001).]