Dark5.0 Speed density? ur pm is full

drtbiker · 08-01-2002, 12:59 PM

I am buying a gt40 motor with a b303 cam my car is a 87 with sd and i really dont care to change it over to mass air, due to the cost and time but mostly the cost i am going to have no money left in the bank =). I heard that you can get away with the e303 w/sd with some time and a fuel pressure regulator, the motor is suppose to arrive in two weeks. Any suggestions on how to stay sd and run the cam.....
thanks for ur time guys

-raini

Dark_5.0 · 08-01-2002, 02:58 PM

I have PM'd you.

08-01-2002, 12:59 PM	#1
drtbiker Registered Member Join Date: Jan 2002 Location: Mt. Prospect,IL Posts: 474	Dark5.0 Speed density? ur pm is full I am buying a gt40 motor with a b303 cam my car is a 87 with sd and i really dont care to change it over to mass air, due to the cost and time but mostly the cost i am going to have no money left in the bank =). I heard that you can get away with the e303 w/sd with some time and a fuel pressure regulator, the motor is suppose to arrive in two weeks. Any suggestions on how to stay sd and run the cam..... thanks for ur time guys -raini __________________ 87-ford-mustang-SOLD! mods: 3:73's, off road h-pipe, b303 cam in gt- 40 motor w/ Power Plus intake, edelbrock 70mm tb & egr spacer, 72mm C&L, bbk long tubes, tremec tranny, centerforce dual friction clutch, upr and lwr CA's 255lph FP and soon more to come.... when i have money again SOME ADVICE Don't do burn outs in reverse it is very expensive New times with dead hook on dr's 13.27@103 with 2.0 60 foots w/100lb system Fastest time to date: 12.8@113 Last edited by drtbiker; 08-01-2002 at 01:11 PM..

08-01-2002, 02:58 PM	#2
Dark_5.0 Registered Member Join Date: Apr 2001 Location: Staging lane Posts: 4,337	I have PM'd you. __________________ 92' LX-Big brakes, Lots and lots of suspension, GT40X heads, Ported cobra intake, stock cam, Vortech SC trim. 00' Lightning-Stock 88'CRX-13 second ego killer

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Tuning a speed density system with mods	Fostang	Windsor Power	6	07-10-2002 11:32 PM
24lbs injectors and crower 15511 on speed density	Yan88gt	Windsor Power	9	03-19-2002 10:16 AM
First ticket. Sucks, sucks bad.	zepherman	Blue Oval Lounge	46	12-16-2001 07:24 PM
EFI conversion with Speed Density and a 351w?	PSI GUY	Windsor Power	2	12-02-2001 11:13 PM
speed density question..	bobtodd	Blue Oval Lounge	2	04-15-2001 02:03 AM