Computer for 94 AODE

scottp · 07-13-2003, 02:13 PM

See Signature for Car Description:

Due to a problem with the C-4 (problem=broke tranny) I am forced to put the AODE back in the car. The mechanic that originally did the swap way back in about 96 had the original tranny and so I had him put it back in. However we seem to have a problem, we need a computer for it. I hade a cobra unit in with the C-4, but now I need one for the Auto. My question is what kind should I buy. I can get "rebuilt" at Advanced Auto for under $150, while some online junk yards want $200 or more for used ones.

Does anyone sell an aftermarket one that might help add more power and help the AODE shift better? I really want to put a manual in, but due to budget problems (aka. New House) that will have to wait.

Any other ideas to get the most out of this new making me slower tranny?

Shaggy · 07-14-2003, 08:19 AM

These guys make a stand alone tranny controller so you can stay with you current ecu ....
http://www.baumannengineering.com/

07-13-2003, 02:13 PM	#1
scottp Registered Member Join Date: Jun 1999 Location: Elyria Ohio, USA Posts: 121	Computer for 94 AODE See Signature for Car Description: Due to a problem with the C-4 (problem=broke tranny) I am forced to put the AODE back in the car. The mechanic that originally did the swap way back in about 96 had the original tranny and so I had him put it back in. However we seem to have a problem, we need a computer for it. I hade a cobra unit in with the C-4, but now I need one for the Auto. My question is what kind should I buy. I can get "rebuilt" at Advanced Auto for under $150, while some online junk yards want $200 or more for used ones. Does anyone sell an aftermarket one that might help add more power and help the AODE shift better? I really want to put a manual in, but due to budget problems (aka. New House) that will have to wait. Any other ideas to get the most out of this new making me slower tranny? __________________ 94 Mustang GT(Boss)GT-40 Aluminum heads,GT-40 Upper and Lower Intake,comp3010 cam,1.7 Rockers,70mm TB,73mm C&L,24# Injectors,Ram Air,K&N,Pullies,Mac headers,High flow cats,Borla Cat-back ,Aluminum Driveshaft,Eaton Posi,31 Spline Superior Axles,TA Girdle,3.73's,Weld Draglites,Subframes,SSM Lift bars,Strut Brace,13.41@100.40 on BFG Radial T/A's

07-14-2003, 08:19 AM	#2
Shaggy Registered Member Join Date: Feb 1999 Location: Houston,TX Posts: 466	These guys make a stand alone tranny controller so you can stay with you current ecu .... http://www.baumannengineering.com/ __________________ A good plan, violently executed now, is better than a perfect plan next week. George S. Patton, General (1885-1945)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
computer code 15 and Superchip	tomazzzo	Windsor Power	1	02-27-2004 04:46 AM
Which wiring harness and computer do I have to have?	EazyE-CPT	Windsor Power	0	07-21-2002 11:33 PM
Help with C&L 76MM & A9L computer install	venumus93	Windsor Power	19	05-16-2002 07:58 PM
A9L Computer	nextime	Windsor Power	14	03-27-2002 10:36 PM
AAAARGH! Steeda timing adjuster causing computer problems!!!	bark3rd	Modular Madness	1	06-04-2001 08:15 PM