
                    © Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
                    
                  
                MustangWorks.com is designed and hosted by Aero3 Media.
| 		
			
			 | 
		#1 | 
| 
			
			
			
			 Registered Member 
			
			
		
			
			
			Join Date: Sep 2002 
				Location: Los Angeles 
				
				
					Posts: 39
				 
				
				
				
				 | 
	
	
	
		
		
			
			 I was planning on putting the 93 cobra maf coversion kit on my mostly stock 5.0 ( 65 mm tb, 2.5 xpipe and exhaust, 3.55gears) Is this a combination that I can run on my stock engine or do I need hipo heads, intake and fuel pump etc. to run this combo. 
		
	
		
		
		
		
		
		
		
		
		
	
	The kit consists includes: cobra ecu 70mm maf 24lb injectors  | 
| 
		 | 
	
	
	
		
		
		
		
			 
		
		
		
		
		
		
			
		
		
		
	 | 
| 		
			
			 | 
		#2 | 
| 
			
			
			
			 Registered Member 
			
			
		
			
				
			
			
			Join Date: Aug 2002 
				Location: broken arrow 
				
				
					Posts: 212
				 
				
				
				
				 | 
	
	
	
		
		
			
			 this kit will work great on a stock motor. 
		
	
		
		
		
		
		
		
			
				__________________ 
		
		
		
		
		
		
	
	Rice Haters Club member #68 '93 Cobra 10.20@135 '89 Gt Coupe 12.20@115  | 
| 
		 | 
	
	
	
		
		
		
		
			 
		
		
		
		
		
		
			
		
		
		
	 | 
| 		
			
			 | 
		#3 | 
| 
			
			
			
			 It's a lot like a race car 
			
			
		
			
				
			
			
			Join Date: Aug 2000 
				Location: Meridian, MS 
				
				
					Posts: 4,130
				 
				
				
				
				 | 
	
	
	
		
		
			
			 I'd just stick with speed density.   
		
	
		
		
		
		
		
		
			Also, the Cobra computer is crap, only one worst is a 94-95 Cobra computer 
				__________________ 
		
		
		
		
		
		
	
	1987 Buick T-type 1998 HD Electra Elide  | 
| 
		 | 
	
	
	
		
		
		
		
			 
		
		
		
		
		
		
			
		
		
		
	 | 
| 		
			
			 | 
		#4 | 
| 
			
			
			
			 I'd rather be basketweaving 
			
			
		
			
				
			
			
			Join Date: Feb 2000 
				Location: Indianapolis 
				
				
					Posts: 2,551
				 
				
				
				
				 | 
	
	
	
		
		
			
			 You'd probably lose atleast 10hp and 10lbft by going with that kit. It is also a HUGE waste of money. 
		
	
		
		
		
		
		
		
			Unless you plan on moderate mods to your car, just stick with what you have now. If you do need to eventually switch to Mass air, do what I did. Just buy the wiring harness, an aftermarket meter, and then find a computer (eBay?). I spent a total of about $200 when i switched over to mass air, and that was with a 75mm Pro-M meter (used) 
				__________________ 
		
		
		
		
		
		
	
	NMRA O/C 9516 NA pumpgas stickshift 347 10.65@125.6, 6.73@100, 1.41 60ft  | 
| 
		 | 
	
	
	
		
		
		
		
			 
		
		
		
		
		
		
			
		
		
		
	 | 
| 		
			
			 | 
		#5 | 
| 
			
			
			
			 Registered Member 
			
			
		
			
				
			
			
			Join Date: Oct 2001 
				Location: Madelia,MN USA 
				
				
					Posts: 58
				 
				
				
				
				 | 
	
	
	
		
		
			
			 I've been on this site for a couple of years reading hundreds of posts and seems every one has givin the 93 cobra computer a bad rap. In my opinion some one here said they suck and everyone spread the word they are the worst. I've had people tell me about them staying in closed loop for 10 seconds and for 3 more seconds between shifts the retard more timing than my moms escort, and that the cars run bad. NOT trying to start any fights here I've just had both the ? 9AL in my 90GT and the stock 93 Cobra computer. I understand that the Cobra's have a few extra goodies that the GT's didn't but the Cobra pulls alot harder at the track and with alot better times than the GT. Is it just the chip in the 93 computer or the entire computer that sucks soo bad? One more question, Has any body here had a 93 Cobra conversion raced it, then switched it to a 90's GT computer and picked up like  7 tenths in the 1/4 mile or is everybody following along with a post they heard it sucked, cuz if mine sucks soo bad maybe I'll be in the market soon for a new computer for my cobra. 
		
	
		
		
		
		
		
		
			
				__________________ 
		
		
		
		
		
		
	
	331 stroker, JE 8.5:1 pistons, H-beam rods, steel crank, main cap, msd with 3step, BBK ceramic long tubes,TKO, 4.30's, motorsport Z303, Victor Jr aluminum heads, crane gold 1.6, southside lift bars, 90/10 front, 50/50 rear, centerforce dual friction clutch, Vortech S-trim soon.  | 
| 
		 | 
	
	
	
		
		
		
		
			 
		
		
		
		
		
		
			
		
		
		
	 | 
| 		
			
			 | 
		#6 | |
| 
			
			
			
			 It's a lot like a race car 
			
			
		
			
				
			
			
			Join Date: Aug 2000 
				Location: Meridian, MS 
				
				
					Posts: 4,130
				 
				
				
				
				 | 
	
	
	
		
		
			
			 Quote: 
	
 A few extra goodies???? It has heads, intake, cam, RR's, and TB. Heck yea it faster, duh. It's the programing of the Cobra computer that makes it suck so bad, but not enough to let you pick up 7 tenths. It is a fairly common swap, especially among 94-95 Cobra guys, to swap a A9L computer into the car. 
				__________________ 
		
		
		
		
		
		
	
	1987 Buick T-type 1998 HD Electra Elide  | 
|
| 
		 | 
	
	
	
		
		
		
		
			 
		
		
		
		
		
		
			
		
		
		
	 | 
| 		
			
			 | 
		#7 | 
| 
			
			
			
			 Registered Member 
			
			
		
			
			
			Join Date: Sep 2002 
				Location: Los Angeles 
				
				
					Posts: 39
				 
				
				
				
				 | 
	
	
	
		
		
			
			 Thanks for everbody's help. 
		
	
		
		
		
		
		
		
		
		
		
	
	 | 
| 
		 | 
	
	
	
		
		
		
		
			 
		
		
		
		
		
		
			
		
		
		
	 | 
| 		
			
			 | 
		#8 | 
| 
			
			
			
			 Registered Member 
			
			
		
			
				
			
			
			Join Date: Aug 2002 
				Location: broken arrow 
				
				
					Posts: 212
				 
				
				
				
				 | 
	
	
	
		
		
			
			 my '93 cobra barely runs with the factory computer but runs like a raped ape with an A9L i'm not sure why the A9L works so much better with the X3Z it barely idles and on the road i full throttled it  and the car bucked and backfired so hard my rearview mirror ripped off the windshield and flew into the back seat so i put the A9L back in and it ran perfect always has. 
		
	
		
		
		
		
		
		
			
				__________________ 
		
		
		
		
		
		
	
	Rice Haters Club member #68 '93 Cobra 10.20@135 '89 Gt Coupe 12.20@115  | 
| 
		 | 
	
	
	
		
		
		
		
			 
		
		
		
		
		
		
			
		
		
		
	 | 
![]()  | 
		
	
		
  | 
	
		
  | 
			 
			Similar Threads
		 | 
	||||
| Thread | Thread Starter | Forum | Replies | Last Post | 
| Raced a 02' Saleen, 01' cobra, and a freaky LS-1. | Dark_5.0 | Stang Stories | 29 | 08-23-2002 07:12 PM | 
| Acura Cl-S says he beat a cobra? | Coupe5oh | Stang Stories | 11 | 07-29-2002 04:27 PM | 
| 2003 Cobra Buyer Beware!! | Doug McGinn | Modular Madness | 16 | 07-25-2002 08:26 AM | 
| Cobra Computer | Bangin Gears | Windsor Power | 1 | 04-30-2001 02:38 AM | 
| New ET 11.457 @ 123.63 in a 99 Cobra! | beefcake | Modular Madness | 1 | 09-25-2000 11:47 AM | 
                    
                  