Take the rubber pieces out of the brackets and turn them end for end. Put them back in the brackets and they should fit fine.
As far as the install goes it's pretty easy. Make sure you get the new thermostat back in the same way your old was is.
Oh yeah, use only distilled water in your radiator to keep it from getting clogged up with lime deposits.
__________________
Project: 1988 Coupe - EFI 5.8L Twin Turbo with Victor intake, Canfield heads, F303 cam, March aluminum underdrive pulleys, TKO (or T56 if funds permit), PBR twin piston calipers and 13" rotors up front, 94 Cobra rear calipers and 12" rotors on the rear, 3.73's, Griggs K-member, tubular front control arms, torque arm and panhard bar, polished 99 Cobra wheels.
"The GR-40 kit installation is now complete, and the humble Fox-chassis car will now out-corner and out-stop a ZR-1 or a Viper, and support massive horsepower additions with perfect balance."
Griggs Racing
ICQ# 42269241
|