The cost of stepping up

88workcar · 05-10-2007, 09:33 PM

I have owned my 88, from 92 to now. I have had many dreams of what I want. I just set the motor of my dreams into my car. I have been building this for 3 1/2 years now. I have had NOS, a turbo, and quite a few POS's. This one is just 342ci, but is suppose to come in close to 600hp. We'll all see real soon, including me. A few of you all have been asking spec. on this motor and I finally have them and time to tell.

342ci short block
stud girdle
canton pan
TFS HIGH PORTS 2.125 in. 1.60ex. Titanium springs, locks & retainers
The flow #s are 319 and 213
cam motion solid roller 714 / 728 - 267 / 276 stud girdle 1.7 RR
ported super victor
780 custom built pro systems carb
Spec stage 3+ clutch, SFI lakewood housing
2" X 3 1/2" KOOKS headers
New starter
sumped stock tank, Aeromotive 1000 pump, hose and reg
14 X 4 K&N with breather top also.

All of this was an enormous amount of money, but the cost that I am refering to is, The TIME, the HEARTACH, the PROBLEMS, the CUTTING, NOTCHING, FITTING, PHONE CALLS, more MONEY, So much unforseen stuff that you would never dream of. But we all love it, and so we endure and carry on. I love it it is in me and will not go away any time soon. I will post dyno # and track testing # a week before Fun Ford at Noproblemracewaypark. If GOD allows me to. Also some more PICs.

USMC302 · 05-11-2007, 09:15 AM

Awesome, congrats and good luck, keep us posted.

88workcar · 05-13-2007, 09:54 PM

Any one who has ever put 2" headers in a fox body know where I'm comming from

fiveohpatrol · 06-10-2007, 09:09 PM

I'd like to see you run a factory speed density with that setup!

good luck with the new motor, sounds like it should run well. What trans are you going to use?

88workcar · 06-23-2007, 04:55 AM

what an appropriate topic I made. I have gotten too days in on the car sence fun ford. Bout right, I have to work today (sat) and tommorrow again. Not much left to do, Wiring to fuel pump, water pump and fan, and 2nd batt. Install radiator. Getting oh so close.

Dark_5.0 · 06-23-2007, 07:29 PM

The cost of stepping up has been insane for me this time around.

M&R street thunder 331 stroker shortblock, all forged and girdled $2,300.00

Comp cams stroker Cam $240.00
Bee hive springs, titanium retainers and locks $500.00
Comp cams roller lifters $200.00
Pushrods 100 bux
Roller rockers $300.00
Comp cams Billet double roller timing set $140.00
Canton 7qt oil pan $240.00
Edelbrock performer RPM II intake $600.00
Aluminum flywheel $300.00
Clutch $350.00

Thank god I already had the Heads. I still need to buy headers and a fuel system!!!!!!!!

I guess if it was cheap everyone would be fast. I envy you 88workcar, I am still months away from being done.

05-10-2007, 09:33 PM	#1
88workcar Registered Member Join Date: Oct 1999 Location: Pierre Part, La. U.S.A. Posts: 1,850	The cost of stepping up I have owned my 88, from 92 to now. I have had many dreams of what I want. I just set the motor of my dreams into my car. I have been building this for 3 1/2 years now. I have had NOS, a turbo, and quite a few POS's. This one is just 342ci, but is suppose to come in close to 600hp. We'll all see real soon, including me. A few of you all have been asking spec. on this motor and I finally have them and time to tell. 342ci short block stud girdle canton pan TFS HIGH PORTS 2.125 in. 1.60ex. Titanium springs, locks & retainers The flow #s are 319 and 213 cam motion solid roller 714 / 728 - 267 / 276 stud girdle 1.7 RR ported super victor 780 custom built pro systems carb Spec stage 3+ clutch, SFI lakewood housing 2" X 3 1/2" KOOKS headers New starter sumped stock tank, Aeromotive 1000 pump, hose and reg 14 X 4 K&N with breather top also. All of this was an enormous amount of money, but the cost that I am refering to is, The TIME, the HEARTACH, the PROBLEMS, the CUTTING, NOTCHING, FITTING, PHONE CALLS, more MONEY, So much unforseen stuff that you would never dream of. But we all love it, and so we endure and carry on. I love it it is in me and will not go away any time soon. I will post dyno # and track testing # a week before Fun Ford at Noproblemracewaypark. If GOD allows me to. Also some more PICs. __________________ 88workcar 1988 Mustang LX 342. 417rwhp @ 6800. 28 X 10 ET Drag, 4.30s, 10.69 @ 126.43 1.42 60ft. 11.13 @ 127.7 on BFGs 1.72 60ft Rice Hater # 42 To be old and wise, You must first be young and stupid I'm somewhere in tthe middle.

05-11-2007, 09:15 AM	#2
USMC302 Registered Member Join Date: Apr 2001 Location: Gallatin, Tn Posts: 1,326	Re: The cost of stepping up Awesome, congrats and good luck, keep us posted. __________________

05-13-2007, 09:54 PM	#3
88workcar Registered Member Join Date: Oct 1999 Location: Pierre Part, La. U.S.A. Posts: 1,850	Re: The cost of stepping up Any one who has ever put 2" headers in a fox body know where I'm comming from __________________ 88workcar 1988 Mustang LX 342. 417rwhp @ 6800. 28 X 10 ET Drag, 4.30s, 10.69 @ 126.43 1.42 60ft. 11.13 @ 127.7 on BFGs 1.72 60ft Rice Hater # 42 To be old and wise, You must first be young and stupid I'm somewhere in tthe middle.

06-10-2007, 09:09 PM	#4
fiveohpatrol I'd rather be basketweaving Join Date: Feb 2000 Location: Indianapolis Posts: 2,551	Re: The cost of stepping up I'd like to see you run a factory speed density with that setup! good luck with the new motor, sounds like it should run well. What trans are you going to use? __________________ NMRA O/C 9516 NA pumpgas stickshift 347 10.65@125.6, 6.73@100, 1.41 60ft

06-23-2007, 04:55 AM	#5
88workcar Registered Member Join Date: Oct 1999 Location: Pierre Part, La. U.S.A. Posts: 1,850	Re: The cost of stepping up what an appropriate topic I made. I have gotten too days in on the car sence fun ford. Bout right, I have to work today (sat) and tommorrow again. Not much left to do, Wiring to fuel pump, water pump and fan, and 2nd batt. Install radiator. Getting oh so close. __________________ 88workcar 1988 Mustang LX 342. 417rwhp @ 6800. 28 X 10 ET Drag, 4.30s, 10.69 @ 126.43 1.42 60ft. 11.13 @ 127.7 on BFGs 1.72 60ft Rice Hater # 42 To be old and wise, You must first be young and stupid I'm somewhere in tthe middle.

06-23-2007, 07:29 PM	#6
Dark_5.0 Registered Member Join Date: Apr 2001 Location: Staging lane Posts: 4,337	Re: The cost of stepping up The cost of stepping up has been insane for me this time around. M&R street thunder 331 stroker shortblock, all forged and girdled $2,300.00 Comp cams stroker Cam $240.00 Bee hive springs, titanium retainers and locks $500.00 Comp cams roller lifters $200.00 Pushrods 100 bux Roller rockers $300.00 Comp cams Billet double roller timing set $140.00 Canton 7qt oil pan $240.00 Edelbrock performer RPM II intake $600.00 Aluminum flywheel $300.00 Clutch $350.00 Thank god I already had the Heads. I still need to buy headers and a fuel system!!!!!!!! I guess if it was cheap everyone would be fast. I envy you 88workcar, I am still months away from being done. __________________ 92' LX-Big brakes, Lots and lots of suspension, GT40X heads, Ported cobra intake, stock cam, Vortech SC trim. 00' Lightning-Stock 88'CRX-13 second ego killer

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Made the decision...I'm stepping up to Victor Jr EFI	Stang_ROTY	Windsor Power	11	08-18-2004 08:09 AM
Exactly how much does it cost...	PKRWUD	Blue Oval Lounge	9	11-25-2002 09:50 PM
So how much is it going to cost!!!!!	elliotness	Blue Oval Lounge	4	04-14-2002 03:37 AM
Cost per HP	surfbeast	Modular Madness	2	03-19-2002 04:50 PM
Cost of AOD to T5	Brian88	Windsor Power	5	01-06-2001 09:26 PM