MustangWorks.com : Ford Forums - View Single Post

302crew · 02-08-2003, 10:23 AM

okay im trading my whole tremec 3550 set up for a c4 with a 3800 stall how do i know if this stall is good for my combo. here is my combo i have 373s in the rear on a 26x10 slick with a 306 edelbrock heads rpm air gap intake demon 650 carb 1.7rr the cam is a custom grind the duration is 218/230 the lift is .3010/.3010 and the lobe seperation is 110.0 and i also have a 150-200 shot on there that i havnt used yet. will this stall converter and tranny work for my setup. thanks for any help

02-08-2003, 10:23 AM	#1
302crew Registered Member Join Date: May 1999 Location: sloatsburg Posts: 261	could use some technical help okay im trading my whole tremec 3550 set up for a c4 with a 3800 stall how do i know if this stall is good for my combo. here is my combo i have 373s in the rear on a 26x10 slick with a 306 edelbrock heads rpm air gap intake demon 650 carb 1.7rr the cam is a custom grind the duration is 218/230 the lift is .3010/.3010 and the lobe seperation is 110.0 and i also have a 150-200 shot on there that i havnt used yet. will this stall converter and tranny work for my setup. thanks for any help __________________ 306 edelbrock 6037 heads full mac exuast 1.7 rr 373 rear hd clutch tremec mighty demon 650 carb msd ignition rpm air gap intake custom cam still trying to get it to run right