Crane PS-91?

Scrapla · 11-25-2002, 07:01 PM

Can I replace my stock coil with a Crane PS-91 cause it says its to be used with there ignition but I also heard its a good stock replacment, I have new plugs and 9mm wires already installed and I'm gonna be doin the cap-n-rotor with the new coil.

lx5091 · 11-25-2002, 07:18 PM

yes you can use it, they have a similar output to the blaster and the FRPP units

PKRWUD · 11-25-2002, 09:10 PM

That's actually my top choice for a replacement coil on a stock to mildly built Ford.

Take care,
~Chris

briand · 11-26-2002, 11:51 AM

have used for close to 7 years, great coil, never had any problems

11-25-2002, 07:01 PM	#1
Scrapla Registered Member Join Date: Apr 2002 Location: Florida Posts: 532	Crane PS-91? Can I replace my stock coil with a Crane PS-91 cause it says its to be used with there ignition but I also heard its a good stock replacment, I have new plugs and 9mm wires already installed and I'm gonna be doin the cap-n-rotor with the new coil. __________________ 90gt 347 and some bolt ons :-) RICE HATERS MEMBER #73

11-25-2002, 07:18 PM	#2
lx5091 Registered Member Join Date: Nov 2001 Location: Fall River, MA Posts: 467	yes you can use it, they have a similar output to the blaster and the FRPP units __________________ '02 Explorer XLT 4.0L --Nice Vehicle '97 Saturn SL1--Soon to be ditched for a Ford!

11-25-2002, 09:10 PM	#3
PKRWUD Junior Member Join Date: Mar 1999 Location: Ventura, California Posts: 8,981	That's actually my top choice for a replacement coil on a stock to mildly built Ford. Take care, ~Chris __________________ Webmaster: Rice Haters Club Jim Porter Racing Peckerwoods Pit Stop Support Your Local RED & WHITE!

11-26-2002, 11:51 AM	#4
briand Registered Member Join Date: Mar 1999 Location: Jackson, LA Posts: 264	have used for close to 7 years, great coil, never had any problems __________________ GT-40X heads(58cc), Cobra upper and lower, 75 mm Bullet, Moroso fenderwell induction, FRPP 65mm TB, 24# injectors, black magic electric fan, phenolic spacer, 1.7 crane cobra roller rockers, crane 2031, BBK 1 5/8 equal length hearders, 2.5 inch off road pipe, 2.5 flowmaster catback, FMS 3.55 gears, T5-Z transmission, FRPP aluminum driveshaft, svo heavy duty clutch, mcleod bullet proff bellhousing, BBK adjustable cluth quadrant, hurst billet shifter, lakewood subframes, BBK strut tower brace, BBK 2pt lower cross bar, FMS 190 lph fuel pump, crane ps91 coil, FMS street pulleys, and 300+ race wires. All thanks goes to my wife sheri, jason, jeff, robby, my dad and all others you helped contribute. most importantly GOD!!!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
MSD or CRANE	Scrapla	Windsor Power	6	05-23-2004 07:31 PM
crane ps91 mounting	scale	Windsor Power	2	09-15-2002 11:22 PM
crane 2030 cam	1985Mustang	Windsor Power	2	12-18-2001 08:58 PM
crane cam dyno results are in ,kind of?	46stang	Modular Madness	5	12-04-2001 08:58 PM
Crane 2031 cam and Edelbrock intakes on, impressions.....	93CobraR	Windsor Power	4	05-23-2001 11:53 AM