will 91 70m mass air fit on 94 GT?

CmS1994MustangGT · 12-04-2001, 05:25 PM

i know i asked this question a couple of days ago but i need a yes or no answer. will a 91 70m mass air bullet which is cal for 24lbs fit on my 94. and do i need to buy a new computer or will a 95 cobra bomputer be fine? thanks for help guys.

CmS1994MustangGT · 12-04-2001, 05:27 PM

i am buying 24lbs injectors and thats why im need to know if this mass air will work.

fiveohpatrol · 12-04-2001, 07:24 PM

well i have a 75mm Pro-M that came off a 95GT on my car right now. You may need to change up your air inlet tube situation though. The 95 meter that I got had 4 bolts (i guess to bolt to the air filter?) and i had to bolt an adaptor to it so i could clamp the inlet tube to it. The cobra computer will be fine with the 24's although I don't know why you would want a cobra computer (they suck)

Unit 5302 · 12-04-2001, 09:05 PM

Is 70mm not the stock size for the MAF?

CmS1994MustangGT · 12-05-2001, 01:53 PM

it is not stock. i dont know what is stock on it but he needed it for his new fuel injectors. the reason i want a cobra comp is that i was told by friends and my mechanic that it would be better with the 24lbs injectors and better for preformance all around. becuase mustangs 94+ are all computers and if u change something that isnt progamed to teh computer, your car wont run right. i dont know if thats true but it does make sense. i put a 180 thermo in to make my car rune cooler but it ran like crap. then when the thermo stuck close i replaced it with a ford 192 thermo and the car hasnt run this good in along time. so the reason i wanted a cobra comp is that i am on a buget and was told that it would be better for injectors and preformance all around. what do u guys recomend computer wise? let me know please before this deal goes through. and the mass air wil work right? i think it will since you put it on yours from a 95.

fiveohpatrol · 12-05-2001, 02:04 PM

i thought the stock size was like 55mm

IMO 24lb injectors are pointless, 19lb'ers will support up to 350hp and alot of people have tuning issues with the 24's

your car will run better with your stock computer than it will with the cobra computer. the best thing to do is to swap in an A9L computer. Not sure what all is involved though.

Unit 5302 · 12-05-2001, 07:18 PM

The stock size is 70mm, I'm almost positive. The throttle body is 60mm. The cobra got a 73mm MAF.

You will be better off with any Mustang 5.0 computer other than the Cobra. I also agree with the point if you're not running near or more than 350hp, an AFPR and 19lbers will do you just as good.

12-04-2001, 05:25 PM	#1
CmS1994MustangGT Registered Member Join Date: Jul 2001 Location: camarillo ca USA Posts: 10	will 91 70m mass air fit on 94 GT? i know i asked this question a couple of days ago but i need a yes or no answer. will a 91 70m mass air bullet which is cal for 24lbs fit on my 94. and do i need to buy a new computer or will a 95 cobra bomputer be fine? thanks for help guys. __________________ 1994 GT with Ford Mortor sport headers - BBK 65mm throttle body - K&N -Borla Exhaust(with stock 94 tail pipes) - BBK 2 cat H pipe - 3:73 gears.

12-04-2001, 05:27 PM	#2
CmS1994MustangGT Registered Member Join Date: Jul 2001 Location: camarillo ca USA Posts: 10	i am buying 24lbs injectors and thats why im need to know if this mass air will work. __________________ 1994 GT with Ford Mortor sport headers - BBK 65mm throttle body - K&N -Borla Exhaust(with stock 94 tail pipes) - BBK 2 cat H pipe - 3:73 gears.

12-04-2001, 07:24 PM	#3
fiveohpatrol I'd rather be basketweaving Join Date: Feb 2000 Location: Indianapolis Posts: 2,551	well i have a 75mm Pro-M that came off a 95GT on my car right now. You may need to change up your air inlet tube situation though. The 95 meter that I got had 4 bolts (i guess to bolt to the air filter?) and i had to bolt an adaptor to it so i could clamp the inlet tube to it. The cobra computer will be fine with the 24's although I don't know why you would want a cobra computer (they suck) __________________ NMRA O/C 9516 NA pumpgas stickshift 347 10.65@125.6, 6.73@100, 1.41 60ft

12-05-2001, 01:53 PM	#5
CmS1994MustangGT Registered Member Join Date: Jul 2001 Location: camarillo ca USA Posts: 10	it is not stock. i dont know what is stock on it but he needed it for his new fuel injectors. the reason i want a cobra comp is that i was told by friends and my mechanic that it would be better with the 24lbs injectors and better for preformance all around. becuase mustangs 94+ are all computers and if u change something that isnt progamed to teh computer, your car wont run right. i dont know if thats true but it does make sense. i put a 180 thermo in to make my car rune cooler but it ran like crap. then when the thermo stuck close i replaced it with a ford 192 thermo and the car hasnt run this good in along time. so the reason i wanted a cobra comp is that i am on a buget and was told that it would be better for injectors and preformance all around. what do u guys recomend computer wise? let me know please before this deal goes through. and the mass air wil work right? i think it will since you put it on yours from a 95. __________________ 1994 GT with Ford Mortor sport headers - BBK 65mm throttle body - K&N -Borla Exhaust(with stock 94 tail pipes) - BBK 2 cat H pipe - 3:73 gears.

12-05-2001, 02:04 PM	#6
fiveohpatrol I'd rather be basketweaving Join Date: Feb 2000 Location: Indianapolis Posts: 2,551	i thought the stock size was like 55mm IMO 24lb injectors are pointless, 19lb'ers will support up to 350hp and alot of people have tuning issues with the 24's your car will run better with your stock computer than it will with the cobra computer. the best thing to do is to swap in an A9L computer. Not sure what all is involved though. __________________ NMRA O/C 9516 NA pumpgas stickshift 347 10.65@125.6, 6.73@100, 1.41 60ft

12-04-2001, 09:05 PM	#4
Unit 5302 Registered Member Join Date: May 1999 Posts: 5,246	Is 70mm not the stock size for the MAF?

12-05-2001, 07:18 PM	#7
Unit 5302 Registered Member Join Date: May 1999 Posts: 5,246	The stock size is 70mm, I'm almost positive. The throttle body is 60mm. The cobra got a 73mm MAF. You will be better off with any Mustang 5.0 computer other than the Cobra. I also agree with the point if you're not running near or more than 350hp, an AFPR and 19lbers will do you just as good.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Z28 vs. "GT"	Smokedawg	Stang Stories	30	05-13-2005 02:12 AM
Are all 8.8 rears the same?	82 GT	Windsor Power	29	08-23-2004 01:06 PM
questions on a 92 mass air	CmS1994MustangGT	Windsor Power	2	12-03-2001 10:41 AM
I Lost my first race in my 2000 GT	Mercury	Stang Stories	10	05-27-2001 10:39 PM