MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Tech > Windsor Power
Register FAQ Members List Calendar

Notices


Reply
 
Thread Tools Rate Thread Display Modes
Old 10-11-2001, 01:48 AM   #1
2FastLX
The Photoshop Guru
 
2FastLX's Avatar
 
Join Date: Feb 2001
Location: Mecca, Indiana
Posts: 1,419
Post For whoever it was considering using stock ported heads

This was copied from an ad I found when I was considering buying a set of ported stock heads instead of porting them myself. Somebody on here was asking about flow numbers of ported stock heads, but I can't remember who it was. The company has a web site at www.bhperformance.com

Heads & Valvetrain
SEMI PORTED ROLLER MOTOR HEADS New process for roller heads BHPerformance is offering this head as a semi ported version, This head, with the intake port volume only 3cc larger than stock while still using the stock 1.78 and 1.45 valve sizes boasts impressive flow numbers. Heads come complete with a burn and blast, new springs to .525 lift, new machined locks, seals, port matched intake and exhaust and a fresh valve job. We offer either exchange for $395 or outright sale for $495. Check out our airflow numbers. .550 lift 196cfm, that's 25% to 30% over stock. Any lifts greater than .525 need our upgrade spring, 10 degree retainers and locks package only $85. Also free shipping! up to $50. BEAT THIS! ALSO WE ACCEPT VISA, MASTER CARD AND DISCOVE

CONTACT: dennis_burke70@ (bhperformance@hotmail.com)
LOCATION: garden city, mi
PHONE: 1-888-564-0223

Sounds like a pretty good deal.

------------------
Gunning for 12's!

Buy your parts here
ICQ# 42269241
2FastLX is offline   Reply With Quote
Old 10-11-2001, 02:56 AM   #2
HiFlow5 0
Registered Member
 
HiFlow5 0's Avatar
 
Join Date: Mar 2000
Location: Springfield, Ma, usa
Posts: 706
Post

i was looking at the jegs site and they had GT40P's for $538. how do the stock prorted heads compair to the P's, will they outflow cause of the port work?

------------------
89 GT AOD w/ shift kit, B&M rachet shifter, Trickflow intake, Crane (E-type) cam, 70Tb, 75MAF, 1.6 Rockers, Pulleys, MAC headers and H-pipe, Dynomax mufflers, K&N, 3 core radiator, white face gauges, custom interior, cobra R rims. 14.9 at 95.07mph with stock 2.73's.

89LX 2.3 Notch, daily beater!
MY89GT
HiFlow5 0 is offline   Reply With Quote
Old 10-11-2001, 03:41 AM   #3
2FastLX
The Photoshop Guru
 
2FastLX's Avatar
 
Join Date: Feb 2001
Location: Mecca, Indiana
Posts: 1,419
Post

195cfm/140cfm is the flow numbers for the GT-40P heads I believe so these are comparable. And since these ported heads come fully assembled it's a simple swap.

But:
I was just looking on Jeg's site and they have them listed for $ 269.99.

397-M-6049-P303 GT-40 "P" Cylinder Head Assembly $269.99
WOW. Something's not right here. I just checked with Holcomb and they have them for $449 bare, or $689 assembled. Jump on the misprint people! GT-40 P heads for wholesale prices LOL.

HiFlow5 0, it looks like gears and a set of heads should be very near the top of your "to do" list

[This message has been edited by 2FastLX (edited 10-11-2001).]
2FastLX is offline   Reply With Quote
Old 10-11-2001, 10:23 AM   #4
HiFlow5 0
Registered Member
 
HiFlow5 0's Avatar
 
Join Date: Mar 2000
Location: Springfield, Ma, usa
Posts: 706
Post

2FastLX, gears and heads ARE on the top of my list along with a converter. if all goes as planned they should be installed over winter. i was thinking of the P's, but i might go with an aluminum head. still debating thought.

------------------
89 GT AOD w/ shift kit, B&M rachet shifter, Trickflow intake, Crane (E-type) cam, 70Tb, 75MAF, 1.6 Rockers, Pulleys, MAC headers and H-pipe, Dynomax mufflers, K&N, 3 core radiator, white face gauges, custom interior, cobra R rims. 14.9 at 95.07mph with stock 2.73's.

89LX 2.3 Notch, daily beater!
MY89GT
HiFlow5 0 is offline   Reply With Quote
Old 10-11-2001, 01:33 PM   #5
2FastLX
The Photoshop Guru
 
2FastLX's Avatar
 
Join Date: Feb 2001
Location: Mecca, Indiana
Posts: 1,419
Post

That was my dilema when I modified my engine. I wanted to get some aluminum heads, but didn't have the cash at the time so I ported my stockers and shaved them at work .030". Then I took them to a shop and had a 3 angle valve job done and pressure tested. Shop labor cost me $100 and the springs cost me $100 I think. So for around $200 I can't complain at all.
2FastLX is offline   Reply With Quote
Old 10-11-2001, 01:53 PM   #6
Moxie
Registered Member
 
Join Date: Aug 2000
Location: Plymouth, MI
Posts: 254
Post

The Jeg's listed price of $269 is for each head. They've listed World heads that way in the past, and a few people on this board called thinking they could get Windsor Jr.'s for $399. It was per head.

------------------
Moxie Racing

The Nitrous Oxide Information Site
Moxie is offline   Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
ported e7's? bailey_57 Windsor Power 28 07-15-2004 07:54 PM
stock heads 91PA5liter Windsor Power 14 07-04-2002 08:21 PM
Is a Ported Stock Intake Worth It? Stang_Crazy Windsor Power 9 09-28-2001 04:22 PM
1.7 Roller Rockers, Hand Porting Exhaust Side Of Stock Heads... Good Idea??? BowTie Eater 5 Liter Windsor Power 12 09-15-2001 02:00 PM
Stock heads Smokedawg Windsor Power 3 04-19-2001 10:16 PM


All times are GMT -5. The time now is 04:59 PM.


SEARCH