moser axels in..rearend built..got a question

LX XLR8R · 08-16-2001, 02:05 PM

they seem to stick out about 1/2" farther than the stock ones so the drums sit out a lil farther..it doesnt look like it would matter..any concern here?
i have a 31 spline tracktion lok and 31 spline mosers

------------------
1987 black notch(ex 4 banger)
DSS 306 w/ main support...Elderbrock 6028 heads..gt-40 intake..24# injectors...70 mm tb..77 pro-m...accel 300+..mac full legnth..tremec w/ pro5oh...full MAC exhaust,off road h-pipe,long tubes, catback...ron davis radiator..subframes, control arms...CFDF II..o yea holley FPR sucks..dont buy one..
AIM=onesillynotch

MiracleMax · 08-16-2001, 10:52 PM

With C-clip elmininators?

I think as long as the pads are fully seated into the drum and the drum seals to the backing plate well enough, then probems should be minimal?

LX XLR8R · 08-17-2001, 09:26 AM

nope still got the c-clips but i put the pads on and put a set of drums on it just for testing porpouses and the pads are fully on the drum by a good 1/2" so it looks l;ike it will be fine

------------------
1987 black notch(ex 4 banger)
DSS 306 w/ main support...Elderbrock 6028 heads..gt-40 intake..24# injectors...70 mm tb..77 pro-m...accel 300+..mac full legnth..tremec w/ pro5oh...full MAC exhaust,off road h-pipe,long tubes, catback...ron davis radiator..subframes, control arms...CFDF II..o yea holley FPR sucks..dont buy one..
AIM=onesillynotch

08-16-2001, 02:05 PM	#1
LX XLR8R Dirk Diggler Join Date: Feb 1999 Location: SLOATSBURG, NY Posts: 1,931	moser axels in..rearend built..got a question they seem to stick out about 1/2" farther than the stock ones so the drums sit out a lil farther..it doesnt look like it would matter..any concern here? i have a 31 spline tracktion lok and 31 spline mosers ------------------ 1987 black notch(ex 4 banger) DSS 306 w/ main support...Elderbrock 6028 heads..gt-40 intake..24# injectors...70 mm tb..77 pro-m...accel 300+..mac full legnth..tremec w/ pro5oh...full MAC exhaust,off road h-pipe,long tubes, catback...ron davis radiator..subframes, control arms...CFDF II..o yea holley FPR sucks..dont buy one.. AIM=onesillynotch

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Rearend question....	JBeryleC	Windsor Power	5	07-29-2003 01:09 AM
Another rearend question	CB93LX	Windsor Power	2	12-15-2002 03:00 PM
Rearend question?	VETTE EATER	Windsor Power	4	10-18-2001 05:42 AM
Question about rearend brace	stevstum	Windsor Power	1	10-10-2001 11:27 AM
Strange or Moser Axels?? Which Differential?	green92gt	Windsor Power	1	01-28-2001 04:26 PM

08-16-2001, 10:52 PM	#2
MiracleMax Registered Member Join Date: Apr 1999 Location: Hayes, Va, USA Posts: 798	With C-clip elmininators? I think as long as the pads are fully seated into the drum and the drum seals to the backing plate well enough, then probems should be minimal?

08-17-2001, 09:26 AM	#3
LX XLR8R Dirk Diggler Join Date: Feb 1999 Location: SLOATSBURG, NY Posts: 1,931	nope still got the c-clips but i put the pads on and put a set of drums on it just for testing porpouses and the pads are fully on the drum by a good 1/2" so it looks l;ike it will be fine ------------------ 1987 black notch(ex 4 banger) DSS 306 w/ main support...Elderbrock 6028 heads..gt-40 intake..24# injectors...70 mm tb..77 pro-m...accel 300+..mac full legnth..tremec w/ pro5oh...full MAC exhaust,off road h-pipe,long tubes, catback...ron davis radiator..subframes, control arms...CFDF II..o yea holley FPR sucks..dont buy one.. AIM=onesillynotch