MustangWorks.com : Ford Forums - View Single Post

jetuomi · 11-03-2001, 05:10 PM

Yeah, I agree, BUT, if you're strapped for cash, I was told that you can do without the C/C plates until a later time, cause there is a bit of adjustment in the stock C/C plates. (for drops of around 1.5" front, the stock setup could be adjust properly!)

don't forget the bump-steer kit..

------------------
94 GT (triple black)
FMS 17" Cobra R's / AL Driveshaft / 3.27's
K&N, 190 lph, subframes, motorsports hd clutch, mac pulleys, msd coil
MAC Shifter/Gauges/Pedals, Euro Clear Projectors & Corners
My CAR!

11-03-2001, 05:10 PM	#3
jetuomi Registered Member Join Date: Dec 2000 Location: Waterloo, ON, Canada Posts: 214	Yeah, I agree, BUT, if you're strapped for cash, I was told that you can do without the C/C plates until a later time, cause there is a bit of adjustment in the stock C/C plates. (for drops of around 1.5" front, the stock setup could be adjust properly!) don't forget the bump-steer kit.. ------------------ 94 GT (triple black) FMS 17" Cobra R's / AL Driveshaft / 3.27's K&N, 190 lph, subframes, motorsports hd clutch, mac pulleys, msd coil MAC Shifter/Gauges/Pedals, Euro Clear Projectors & Corners My CAR!