MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Tech > Windsor Power
Register FAQ Members List Calendar

Notices


Reply
 
Thread Tools Rate Thread Display Modes
Old 02-26-2001, 05:31 AM   #1
StreetStang37
Registered Member
 
Join Date: Dec 2000
Location: San Jose, California USA
Posts: 275
Post Best Heads For Stock Short Block

What heads should I get for a stock short block? For the Twisted Wedge heads it says you need to use flat top pistons. I forget what mustangs have stock, are they dome? Im not getting them yet, I want to buy the heads, intake and cam all at once so it would be cheaper to install. I know edelbrock has a good set up in the Perfomer, just wondering if there is better for the stock short block? Also, how much valve lift am I able to get msx. Maybe some other stuff that may be a better deal (no NOS posts please) would be a welcomed too. I also still want to be able to use the headers I have now.

------------------
1993 Mustang GT - March Ram Air & Pullies, K&N, C&L 73mm MAF, Super Competition Hooker Headers, 2 1/2 in. mandrel bent cat back, High Flow H-Pipe, Pro 5.0 Shifter, 16* Timing Advance
StreetStang37 is offline   Reply With Quote
Old 02-26-2001, 10:59 AM   #2
86GT
Sniffed too much n20
 
Join Date: Oct 1998
Location: Ont, Canada
Posts: 1,018
Post

Edelbrock has a "performer power package" that they dyno'd and works well together. Basically its the Ford E-303 cam and their performer 5.0 (6037) heads and their performer intake.

Or you could run a Trick Flow setup which I considered for quite some time. Use the TW heads, st. 1 cam and Street intake and you'd be around 340hp based on how well its tuned.

I'm pretty sure that the stock pistons will work with the TWs and upto 520 or so lift on the cam, their tech people could answer that better than I. Myself I'm running the Edelbrock 6032 heads, Performer RPM intake and ford's F-303 cam w/1.6 roller rockers. When I checked the piston to valve clearance, I had the room, but I wouldn't push it over more than that unless you flycut the pistons more.
86GT is offline   Reply With Quote
Old 02-26-2001, 11:10 AM   #3
92Rustang
Registered Member
 
92Rustang's Avatar
 
Join Date: Feb 1999
Location: Smithton, IL, US
Posts: 215
Post

I would look in to the holley systemaxII. I like this setup because it is a great bolt on package. The heads and intake are all gasket match and have been bowl blended . No spending four weeks playing with a dremel!!!
The packeage is about $2000( heads, intake, cam, chain, bolts) just add rockers(175) and go.

------------------
Check my site for mod
www.fordmustanggt.com
92Rustang is offline   Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
What's the diff between a truck 5.0 short block and a mustang 5.0 short block??? giddyup306 Built Ford Tough 2 05-15-2003 06:30 PM
Cobra Heads On Gt Block? MIKESHAW Modular Madness 1 05-28-2002 06:05 AM
Will Cobra Heads Fit On Gt Block 00. MIKESHAW Modular Madness 0 05-27-2002 10:33 AM
cleavland 4v heads on a windsor block BowTie Eater 5 Liter Windsor Power 5 01-08-2001 07:38 PM
cleavland 4v heads on a windsor block BowTie Eater 5 Liter Windsor Power 0 01-07-2001 09:19 PM


All times are GMT -5. The time now is 10:36 PM.


SEARCH