dynomax race bullets
 

i was just wandering if anyone has tried these yet.. i am staying away from flowmaster and looking at either those bulltes or the mac pro dumps just wandering if anyone has tried them yet...

------------------
84 lx coupe 75 truck block .030 over trw 10-1 pistons comp magnum 280h .512 .512 lift with 230 duration.. early casting heads 1.94 1.60 valves 58 cc chambers harland sharp rockers 1.6 air gap intake with mild porting holley 600 vac seconderies 2 inch open spacer. built man c-4 with PI 2800 sthall 8.8 strange spool 3.73's moser 31 spline still building the rest going for high to mid 11's

My wife refers to them as 'anti-mufflers'. We both love their sound...LOUD. It'll definitely draw attention on the street, especially with turndowns like I run them.

------------------
Jeff Chambers
Trophy Stock #3
11.611 Seconds / 116.7 MPH
Chambers Racing Team

I have a set of them. They don't quiet down the car much.

------------------
347 W/ A-trim 6#'s, Canfield heads, out of the box Systemax II intake, solid roller cam. 11.1 @123mph 1.46 60FT

93lx 5.0 daily driver
MY CAR http://www.mustangworks.com/cgi-bin/...splay.cgi?1288

thats what i thought i think will sound good with my cam summit said it had one hell of a lope i cant wait i need this running by july to get it broke in by august for the race in bristol aug 3 FFW.. thanks for the info i think that is what i am going with

------------------
84 lx coupe 75 truck block .030 over trw 10-1 pistons comp magnum 280h .512 .512 lift with 230 duration.. early casting heads 1.94 1.60 valves 58 cc chambers harland sharp rockers 1.6 air gap intake with mild porting holley 600 vac seconderies 2 inch open spacer. built man c-4 with PI 2800 sthall 8.8 strange spool 3.73's moser 31 spline still building the rest going for high to mid 11's