MustangWorks.com : Ford Forums

MustangWorks.com : Ford Forums (http://forums.mustangworks.com/index.php)

- Windsor Power (http://forums.mustangworks.com/forumdisplay.php?f=8)

- - e-cam? (http://forums.mustangworks.com/showthread.php?t=47288)

mudchucker

10-26-2005 04:49 AM

e-cam?

i bought a "new in the box" e-cam from a guy i know. It is truly new, but it has some rack rust on it. It is not pitted at all, but the lobes that have been down all have a light rusting to them. Can i use this cam? how do i take care of the rust if i can use it?

thanks

Dark_5.0

10-26-2005 12:45 PM

Re: e-cam?

Soak the cam overnight in WD-40 and then sand the rust with 2000 grit sand paper. The rust will pipe right off.

Been there done that.

mudchucker

10-26-2005 05:09 PM

Re: e-cam?

Quote:

Originally Posted by Dark_5.0

Soak the cam overnight in WD-40 and then sand the rust with 2000 grit sand paper. The rust will pipe right off.

Been there done that.

o-fantastic. i was afraid this thing was shot.

thanks for the help!!!

All times are GMT -5. The time now is 04:17 AM.