Edelbrock Upper W/ Truck Lower??

IMPULSERACING · 04-16-2001, 10:38 AM

Can I use an Edelbrock upper with a truck lower? If so how does the truck lower compare to a ported edelbrock lower? Thanks in advance!

------------------
92' LX Hatch 5 spd Edelbrock Performer Intake, pro-m 75mm MAF, 70mm T.B., 24lb injectors, 190lph, Mac fenderwall cold air induction, mallary ignition and coil, Cobra 1.7 rockers, BBK full length headers, 373:1 gear, upper and lower control arms, supersubs, 50/50's, Eibach front drag springs, Moroso rear trick springs, no sway bar, battery in hatch, compucar N20 kit

93CobraR · 04-16-2001, 11:33 AM

Nope. A truck lower can only be used with a Holley Upper or Saleen upper.

------------------
87 GT, 4 inch cowl hood,17x9 Cobra R's/255/45's,GT-40 heads,long tubes headers,h-pipe,Flows,BBK cold air, Mass air,70mm MAF, 1.7's, 1" spacer,underdrive pulleys,Pro 5.0, King Cobra, Adj. fuel Reg., Lakewood Lift Bars,50/50's,subframes, 4.10's.
Best time 12.96
Best MPH 103.42
Best 60' 1.695

Visit my site at:
http://www.geocities.com/cobrar93_2000/MyPage.html

jonnyk · 04-16-2001, 02:05 PM

Also the Edelbrocks can only be used with Edelbrock setups (uppers and lowers must match) because they have rectangular ports..
I don't know how a ported truck or Edel would stack up against each other though. They can both flow some pretty good numbers when ported.

------------------
1991 LX Hatch 5.0L

04-16-2001, 10:38 AM	#1
IMPULSERACING Registered Member Join Date: Dec 1999 Location: chicago,IL,USA Posts: 158	Edelbrock Upper W/ Truck Lower?? Can I use an Edelbrock upper with a truck lower? If so how does the truck lower compare to a ported edelbrock lower? Thanks in advance! ------------------ 92' LX Hatch 5 spd Edelbrock Performer Intake, pro-m 75mm MAF, 70mm T.B., 24lb injectors, 190lph, Mac fenderwall cold air induction, mallary ignition and coil, Cobra 1.7 rockers, BBK full length headers, 373:1 gear, upper and lower control arms, supersubs, 50/50's, Eibach front drag springs, Moroso rear trick springs, no sway bar, battery in hatch, compucar N20 kit

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
stock lower 90 to stock lower truck	srv1	Windsor Power	1	03-18-2002 01:10 AM
Explorer upper....but what lower to use???	84LX89GT	Windsor Power	2	08-13-2001 05:30 AM
REAR UPPER AND LOWER CONTROL ARMS	bcinyuz	Windsor Power	1	05-08-2001 04:17 AM
suspension...lower and upper...	Nycool	Modular Madness	5	11-22-1999 02:53 PM

04-16-2001, 11:33 AM	#2
93CobraR Registered Member Join Date: Oct 1999 Location: Cincinnati, Ohio Posts: 1,575	Nope. A truck lower can only be used with a Holley Upper or Saleen upper. ------------------ 87 GT, 4 inch cowl hood,17x9 Cobra R's/255/45's,GT-40 heads,long tubes headers,h-pipe,Flows,BBK cold air, Mass air,70mm MAF, 1.7's, 1" spacer,underdrive pulleys,Pro 5.0, King Cobra, Adj. fuel Reg., Lakewood Lift Bars,50/50's,subframes, 4.10's. Best time 12.96 Best MPH 103.42 Best 60' 1.695 Visit my site at: http://www.geocities.com/cobrar93_2000/MyPage.html

04-16-2001, 02:05 PM	#3
jonnyk Being stroked is great Join Date: Oct 1998 Location: Alberta, Canada Posts: 772	Also the Edelbrocks can only be used with Edelbrock setups (uppers and lowers must match) because they have rectangular ports.. I don't know how a ported truck or Edel would stack up against each other though. They can both flow some pretty good numbers when ported. ------------------ 1991 LX Hatch 5.0L