Chris, ya da man!
Ok, voltage with koff at
pin 1 (yellow) is 12.4v
with kon
pin 37 (red) is 12.4v
pin 26 (brn/wht) is 0v
pin 57 (red) is 12.4v
with koff, resitances measured as follows
pins 40&60 (blk/wht) were 3.5 Kohms (not good, I think)
pin 49 (org) about 750 ohms
it was about 750 ohms when I touched the metal of the chassis
Now, when I went key on, I noticed that pins 40, 60 and 49 were all at 12 volts! This is bad, I assume
Thanks for your quick answers
Hope to hear from you soon
|