MustangWorks.com : Ford Forums - View Single Post - EEC does not energize unless key turned to start

crazypete · 09-18-2002, 01:35 PM

Ok, I tested resistances all around

Between pin 50 and ground was about 4 volts, but resistance was infinite between pins 50 & 9 , 50 & 40 and 50 & 60. This was with the key turned on and the maf disconnected.

09-18-2002, 01:35 PM	#21
crazypete Registered Member Join Date: Sep 2002 Location: Boston Posts: 592	Ok, I tested resistances all around Between pin 50 and ground was about 4 volts, but resistance was infinite between pins 50 & 9 , 50 & 40 and 50 & 60. This was with the key turned on and the maf disconnected.