MustangWorks.com : Ford Forums - View Single Post - 24lbs injectors and crower 15511 on speed density

Yan88gt · 03-15-2002, 07:22 PM

To everyone who think it's impossible to put cam and bigger injectors on speed density, yes it work. No surge,just a little rougher than stock. My fuel pressure is at 29 psi ( 1psi above the stock setting), my tps is set 1.03 V and my timing is at 11 degree. I know, 11 is low but my superchip add 2-3 degree. I'm not saying that every cam will work with speed density, but this one does! The only thing i needed to do for the injectors is to lower the fuel pressure.

03-15-2002, 07:22 PM	#1
Yan88gt Registered Member Join Date: Jun 2001 Location: Quebec canada Posts: 92	24lbs injectors and crower 15511 on speed density To everyone who think it's impossible to put cam and bigger injectors on speed density, yes it work. No surge,just a little rougher than stock. My fuel pressure is at 29 psi ( 1psi above the stock setting), my tps is set 1.03 V and my timing is at 11 degree. I know, 11 is low but my superchip add 2-3 degree. I'm not saying that every cam will work with speed density, but this one does! The only thing i needed to do for the injectors is to lower the fuel pressure. __________________ Ported stock heads and intake, 65mm throttle body, 1.7 roller rockers, pulley, superchip,afpr, electric fan, motorsport headers, magnaflow cat-back, hurst shifter, 3.55 gear, speed density computer 12.81@ 104.7 on E.T street (1.77)