Threaded Mode
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
03-15-2002, 07:22 PM
|
#1 |
|
Registered Member
Join Date: Jun 2001
Location: Quebec canada
Posts: 92
|
24lbs injectors and crower 15511 on speed density
To everyone who think it's impossible to put cam and bigger injectors on speed density, yes it work. No surge,just a little rougher than stock. My fuel pressure is at 29 psi ( 1psi above the stock setting), my tps is set 1.03 V and my timing is at 11 degree. I know, 11 is low but my superchip add 2-3 degree. I'm not saying that every cam will work with speed density, but this one does! The only thing i needed to do for the injectors is to lower the fuel pressure.
__________________
Ported stock heads and intake, 65mm throttle body, 1.7 roller rockers, pulley, superchip,afpr, electric fan, motorsport headers, magnaflow cat-back, hurst shifter, 3.55 gear, speed density computer 12.81@ 104.7 on E.T street (1.77) |
|
|
|
|