EFI guru's PLEASE HELP!!!

WE287GN · 02-07-2001, 09:24 PM

Need to find out what fires injectors ..What are they operated in reference to? Does the dist. tell them when to fire.Or is it somehow set in the puter? The reason I ask, is we put a roller maf motor in my dads f250 using stock computer.so i'm wondering if just by changing the firing order will the injectors follow that order, or do we have to swap the injectors also?
We had to change firing order to the mustang motor...Should the injectors harness order have to be changed also?

Hope someone can make sense of this?
Thanks
Chris
WE287GN@mediaone.net

NOS_Notch · 02-07-2001, 10:32 PM

I would have to say if the firing order is for the computer you are using...you are fine.

------------------
4.10's,long tubes & 75 shot...Goes 12.50's
Check it out at http://www.burnouts.webprovider.com

WE287GN · 02-08-2001, 06:40 PM

well we left the computer from the flat tappet 5.0 in there along with induction ..
flat 5.0 order was (truck motor)15426378
thats what the computer is for
and the stang ho i beleieve is 13726548

02-07-2001, 09:24 PM	#1
WE287GN Registered Member Join Date: Dec 2000 Posts: 4	EFI guru's PLEASE HELP!!! Need to find out what fires injectors ..What are they operated in reference to? Does the dist. tell them when to fire.Or is it somehow set in the puter? The reason I ask, is we put a roller maf motor in my dads f250 using stock computer.so i'm wondering if just by changing the firing order will the injectors follow that order, or do we have to swap the injectors also? We had to change firing order to the mustang motor...Should the injectors harness order have to be changed also? Hope someone can make sense of this? Thanks Chris WE287GN@mediaone.net

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
blower guru's needed asap!!!	briand	Windsor Power	1	01-03-2003 11:13 PM
forced inducution/5.0 gurus: please help	93GTDIN	Windsor Power	7	02-06-2002 12:54 AM
2FastLX and other photoshop guru's, are you bored?	fiveohpatrol	Blue Oval Lounge	16	02-02-2002 09:22 PM
engine guru's ,need help	Old Guy with 87 GT	Blue Oval Lounge	7	01-24-2002 03:50 PM
Photoshop guru's - Let's see your creations	2FastLX	Blue Oval Lounge	20	01-23-2002 05:52 PM

02-07-2001, 10:32 PM	#2
NOS_Notch Registered Member Join Date: Sep 2000 Location: Fresno,CA. USA Posts: 384	I would have to say if the firing order is for the computer you are using...you are fine. ------------------ 4.10's,long tubes & 75 shot...Goes 12.50's Check it out at http://www.burnouts.webprovider.com

02-08-2001, 06:40 PM	#3
WE287GN Registered Member Join Date: Dec 2000 Posts: 4	well we left the computer from the flat tappet 5.0 in there along with induction .. flat 5.0 order was (truck motor)15426378 thats what the computer is for and the stang ho i beleieve is 13726548