MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Tech > Windsor Power
Register FAQ Members List Calendar Mark Forums Read

Notices


Reply
 
Thread Tools Rate Thread Display Modes
Old 09-06-2001, 02:55 AM   #1
84LX89GT
Mustangs
 
84LX89GT's Avatar
 
Join Date: Jul 2000
Posts: 1,938
Post EGR valve question?

The EGR has been bad since i bought the car. I just verified this tonight because of the EGR code and because it wouldn't open when vacuum was applied to it. The previous owner said he'd put on several EGR valves in the 5 years he had it. Here's my question:
Is the EGR valve on the '87+ 5.0L's a common fail item?
He also mentioned he bought used EGR valves so that's probably the problem, but i was just wondering if anyone else has had to change their EGR valve a few times.
I'm also interesting in hearing from people who have never had to change their EGR valve.
Thanks,

------------------
previous name: 84stangLX
'84 Mustang 5.0 LX
my LX
'89 Mustang GT
my GT

84LX89GT is offline   Reply With Quote
Old 09-06-2001, 10:01 AM   #2
Capri306
Moderator
 
Capri306's Avatar
 
Join Date: Sep 1998
Location: Grand Rapids, Michigan, USA
Posts: 1,001
Post

I've replaced mine once, but it wasn't necessary (found out it was the EGR regulator causing problems instead). What a lot of people don't realize is that the EVP (EGR valve position) sensor that bolts onto the back of the valve has an O-ring to seal in the vacuum. When the dude swapped valves, I bet a quadrillion bucks he didn't replace the O-ring OR the sensor, and just bolted on an entire 'assembly' without checking it first. The EVP itself could also leak. You could buy each item (valve and sensor) then experiment at home to determine what's going on. There's always the real good possibility that yes the EGR valve IS bad.

This guy bought USED EGR VALVES?!?!? WTF?!?!?! Keep your eyes open for other strange things on this car, dude.

------------------
Capri306, Moderator, The Mustang Works Online
1979 Mercury Capri, 5.0L -- C4 -- 2.73
1987 Mustang LX Notch
Capri306 is offline   Reply With Quote
Old 09-06-2001, 02:14 PM   #3
84LX89GT
Mustangs
 
84LX89GT's Avatar
 
Join Date: Jul 2000
Posts: 1,938
Post

You're absolutely right about looking for other strange things. I knew when i bought the car i'd probably find some surprises. One of those turned out to be a hastily and shittily assembled power wire to the voltage regulator (Which i, "conveniently" found out 1/2 before i was supposed to be at work). He did some stuff right, be he was cheap in alot of ways. I'll probably go ahead and replace the EVP sensor while i'm at it, since i'm back there, i can almost garauntee that even if that's not the problem itself it could be part of it, and i don't like doing things twice. Thanks Capri306!
84LX89GT is offline   Reply With Quote
Old 09-07-2001, 02:09 AM   #4
84LX89GT
Mustangs
 
84LX89GT's Avatar
 
Join Date: Jul 2000
Posts: 1,938
Smile

FIXED IT!
You were absolutely correct Capri306, thanks. The idiot who owned the car before me didn't even put on a gasket on the EVP sensor to the EGR valve so there was no seal, and as a result...no vacuum inside the valve. I had to buy a new EVP sensor for $20-something dollars, and a $1 EGR gasket and my car was driving and pulling better than ever. Thanks again,

------------------
previous name: 84stangLX
'84 Mustang 5.0 LX
my LX
'89 Mustang GT
my GT

84LX89GT is offline   Reply With Quote
Reply


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Air by pass valve question. Jaegermeister2k Power Adders 21 05-06-2005 09:40 PM
Valve cover question Stang951 Windsor Power 1 03-27-2004 11:57 PM
EGR Valve Question. Bobby L Windsor Power 1 08-22-2002 02:23 PM
master cylinder and prop valve question shelby2 Classic Mustangs 1 07-05-2002 05:32 PM
valve train question??? vande97 Windsor Power 0 05-04-2001 05:00 PM


All times are GMT -5. The time now is 06:21 AM.


SEARCH