What do you think?

blueneonman1 · 07-09-2002, 02:49 AM

I made this guage plate today in 1 hour. It's a piece of plexiglass wraped in soft vinyl. The fit is perfect - it just pushes in and stays. It's easily taken back out by popping it out from the back. The guages are a nice tight fit too.

This is only for 94-present stangs.

I am thinking about selling some of these plates on e-bay. I'm going to make some plates with all switches and some like this. Also I'm going to make some panels for the ashtray and sell them. I'm thinking I'll try to sell them for $40 to start and see if people like it.

What do you all think of this? Would any of you buy something like this? I can make the panels in just about any color vinyl like tan for the tan interior mustangs, yellow, red, whatever.

BTW, e-mail me (blueneonman@hotmail.com) if you would like one and we can talk further. I also have my old tray that went in there if anyone's interested.

For some high quality pictures (big filesize) go here:
http://blueneonman.freewebspace.com/guage.html
http://blueneonman.freewebspace.com/guage2.html
http://blueneonman.freewebspace.com/guage3.html

here is my old panel that I made:
http://blueneonman.freewebspace.com/plate.html

cyberstang5.0 · 07-09-2002, 07:07 AM

Well, I would like to give you my opinion, but the links don't work.

Maroon 5.0 LX · 07-09-2002, 07:39 AM

You might want to consider a new picture host, your "bandwidth has been exceeded!"

blueneonman1 · 07-09-2002, 12:09 PM

ok problem fixed...thanks.

1969Mach1 · 07-09-2002, 12:20 PM

Looks pretty good, does the $40 include the guages? Cause not all guages are the same size so if someone buys the plate and there guage don't fit what'ch ya gonna do? Just curious. This is my first time posting in Windsor power, I figured I'd check it out considering my engine was built in the Windsor plant.

Looks good though.

§am.

blueneonman1 · 07-09-2002, 12:54 PM

I would be one broke mofo if $40 included the guages. haha, but the plate will accept any 2-1/16" guage

07-09-2002, 02:49 AM	#1
blueneonman1 Registered Member Join Date: Mar 2001 Location: Palm Harbor, FL Posts: 208	What do you think? I made this guage plate today in 1 hour. It's a piece of plexiglass wraped in soft vinyl. The fit is perfect - it just pushes in and stays. It's easily taken back out by popping it out from the back. The guages are a nice tight fit too. This is only for 94-present stangs. I am thinking about selling some of these plates on e-bay. I'm going to make some plates with all switches and some like this. Also I'm going to make some panels for the ashtray and sell them. I'm thinking I'll try to sell them for $40 to start and see if people like it. What do you all think of this? Would any of you buy something like this? I can make the panels in just about any color vinyl like tan for the tan interior mustangs, yellow, red, whatever. BTW, e-mail me (blueneonman@hotmail.com) if you would like one and we can talk further. I also have my old tray that went in there if anyone's interested. For some high quality pictures (big filesize) go here: http://blueneonman.freewebspace.com/guage.html http://blueneonman.freewebspace.com/guage2.html http://blueneonman.freewebspace.com/guage3.html here is my old panel that I made: http://blueneonman.freewebspace.com/plate.html __________________ Blue Streak - '95 5.0L Mustang GT convertible \| Saleen heat extractor fiberglass hood \| K&N custom CAI \| Taylor Spiro Pros \| Walbro 255lph pump \| Kirban AFPR \| MSD Cap/Rotor/Blaster TFI \| 2 chamber flows w/ dumps \| BBK LTs \| BBK short h-pipe \| No smog or EGR \| NOS 75hp dry kit w/ heater & purge \| Battery in trunk\| Chassis Eng. subframes \| Custom 6-pt rollbar \| King Cobra clutch \| Steeda adj. clutch cable w/ double hook quad. & firewall adj. \| B&M Ripper shifter \| FMS C springs \| Pro3i C/C plates \| Lakewood 70/30 struts \| Comp. Eng. 3-way shocks \| Chassis Eng. LCAs \| Fan switch \| 180* thermo FMS\| Kumho Ecsta 255/40's all around \| Coolest neon lighting on a Mustang EVER! Don't find yourself in front of me...my brakes SUCK! saving up for a complete Cobra package Homepage: http://www16.brinkster.com/blueneonman/ Best 1/4 time: 13.5 @ 101 Best 1/8 time: 8.6 @ 84 Last edited by blueneonman1; 07-09-2002 at 12:08 PM..

07-09-2002, 07:39 AM	#3
Maroon 5.0 LX Registered Member Join Date: Mar 2001 Location: Southern Maryland Posts: 471	You might want to consider a new picture host, your "bandwidth has been exceeded!" __________________ '89 LX 5.0 - 5 speed. Original Owner '94 E-150 4.9 Hi-Top Conversion Van '06 Mustang V-6, 5 speed

07-09-2002, 12:09 PM	#4
blueneonman1 Registered Member Join Date: Mar 2001 Location: Palm Harbor, FL Posts: 208	ok problem fixed...thanks. __________________ Blue Streak - '95 5.0L Mustang GT convertible \| Saleen heat extractor fiberglass hood \| K&N custom CAI \| Taylor Spiro Pros \| Walbro 255lph pump \| Kirban AFPR \| MSD Cap/Rotor/Blaster TFI \| 2 chamber flows w/ dumps \| BBK LTs \| BBK short h-pipe \| No smog or EGR \| NOS 75hp dry kit w/ heater & purge \| Battery in trunk\| Chassis Eng. subframes \| Custom 6-pt rollbar \| King Cobra clutch \| Steeda adj. clutch cable w/ double hook quad. & firewall adj. \| B&M Ripper shifter \| FMS C springs \| Pro3i C/C plates \| Lakewood 70/30 struts \| Comp. Eng. 3-way shocks \| Chassis Eng. LCAs \| Fan switch \| 180* thermo FMS\| Kumho Ecsta 255/40's all around \| Coolest neon lighting on a Mustang EVER! Don't find yourself in front of me...my brakes SUCK! saving up for a complete Cobra package Homepage: http://www16.brinkster.com/blueneonman/ Best 1/4 time: 13.5 @ 101 Best 1/8 time: 8.6 @ 84

07-09-2002, 12:20 PM	#5
1969Mach1 HEY I CAN SET A NAME NOW! Join Date: Oct 2001 Location: Ontario, Canada Posts: 2,556	Looks pretty good, does the $40 include the guages? Cause not all guages are the same size so if someone buys the plate and there guage don't fit what'ch ya gonna do? Just curious. This is my first time posting in Windsor power, I figured I'd check it out considering my engine was built in the Windsor plant. Looks good though. §am. __________________ 1969 Mustang Mach 1Sold 351-4V Windsor, 4 Speed MACH 1 - Moving At The Speed Of Sound. 1979 Mustang Indianapolis 500 Pace Car For Sale - Email me for Info 302-2V, 3-Speed Auto One of 2,106 made One of 405 sent to Canada. Yes those are caution lights, and No you can't pass me when there on. Ricer Hater's Club - Member #4

07-09-2002, 12:54 PM	#6
blueneonman1 Registered Member Join Date: Mar 2001 Location: Palm Harbor, FL Posts: 208	I would be one broke mofo if $40 included the guages. haha, but the plate will accept any 2-1/16" guage __________________ Blue Streak - '95 5.0L Mustang GT convertible \| Saleen heat extractor fiberglass hood \| K&N custom CAI \| Taylor Spiro Pros \| Walbro 255lph pump \| Kirban AFPR \| MSD Cap/Rotor/Blaster TFI \| 2 chamber flows w/ dumps \| BBK LTs \| BBK short h-pipe \| No smog or EGR \| NOS 75hp dry kit w/ heater & purge \| Battery in trunk\| Chassis Eng. subframes \| Custom 6-pt rollbar \| King Cobra clutch \| Steeda adj. clutch cable w/ double hook quad. & firewall adj. \| B&M Ripper shifter \| FMS C springs \| Pro3i C/C plates \| Lakewood 70/30 struts \| Comp. Eng. 3-way shocks \| Chassis Eng. LCAs \| Fan switch \| 180* thermo FMS\| Kumho Ecsta 255/40's all around \| Coolest neon lighting on a Mustang EVER! Don't find yourself in front of me...my brakes SUCK! saving up for a complete Cobra package Homepage: http://www16.brinkster.com/blueneonman/ Best 1/4 time: 13.5 @ 101 Best 1/8 time: 8.6 @ 84

07-09-2002, 07:07 AM	#2
cyberstang5.0 347ci of HORSE POWER!!! Join Date: Jul 2001 Location: Houston, TX Posts: 1,416	Well, I would like to give you my opinion, but the links don't work.