![SEARCH](http://www.mustangworks.com/images/search.png)
![The Mustang Works](http://www.mustangworks.com/images/mw_footer_logo.gif)
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
![]() |
#1 |
Registered Member
Join Date: Oct 2000
Location: ~Columbus~GA~31909~
Posts: 156
|
![]() 10-14-03
For you running electrical fuel pressure gauges, I have a question. Does your needle move when you are driving?? Mine seems to sit at 30psi and go up to about 32psi when I nail down on it. I set the psi at about 36-40 and no matter what psi, I set it at,, it reads the same. I set with the vac off and the when driving and watching the gauge is with the vac on......Just wondering if this was correct... Part 2: 10-15-03 Well ,, anyway today it is acting totally different.. It still sits at 30psi, but when I give it gas or get on it the psi goes down to about 22psi. Think, maybe the sending unit is messed up??? This sucks too, I want a FP gauge on when I install the blower...
__________________
Mike Blown~AOD'ed~331~ T-top~ 86GT Check out car on my page here ------ > ~~My 86GT T-top ~~ |
![]() |
![]() |
![]() |
#2 |
Registered Member
Join Date: May 2001
Location: Fernandina Beach, FL 32034
Posts: 178
|
![]() Hey Mike sounds like somrthing not working right. You send you set the pressure 36-40, did you use a mechanical gauge? Yes it will move around but it should go up when you get on onit. Usually a 8 to 10 psi lowerwith vacuum hook up
__________________
Bill Heiser 90 Convertable 5.0 LX, ported E7s w/ THumper valve job, TFS street, FR 65mm TB, B cam w/1.7 cobra rockers, kirban AFPR, Mac CAI, Mac Headers, off road h, 3 chamber flows, Crane ign. box, 3:73s, Art Carr AOD & 2600 converter |
![]() |
![]() |
![]() |
#3 |
Registered Member
Join Date: Oct 2000
Location: ~Columbus~GA~31909~
Posts: 156
|
![]() I also hooked a mech gauge up to check. I have 2 schrader valves, on behind the alt and one by the regulator. And when I set it at 36-38psi on the mech gauge I was getting about 35-37psi on the electric, with vac off..When I put vac back on they both drop some like to 30 on the electric and 32 on the mech..
Only thing is I can't watch the mech gauge when driving, this is one I bought from the parts store and mounts to the schrader valve with about a 1ft long hose. But when I get on it the psi drops to abotu 22-24 on the electric gauge. You think, running 30# and 255 HP in tank, have something to do with it. Since the injectors deliver more fuel, would the volume be there but not the pressure??????? ![]()
__________________
Mike Blown~AOD'ed~331~ T-top~ 86GT Check out car on my page here ------ > ~~My 86GT T-top ~~ |
![]() |
![]() |
![]() |
#4 |
Registered Member
Join Date: May 2001
Location: Fernandina Beach, FL 32034
Posts: 178
|
![]() It shouldn't. a 255 pump should have at least 70 psi open pressure. And it should be able to move plenty of volume at 40 psi. You may have a pick up problem in the tank or pump maybe going away on you
__________________
Bill Heiser 90 Convertable 5.0 LX, ported E7s w/ THumper valve job, TFS street, FR 65mm TB, B cam w/1.7 cobra rockers, kirban AFPR, Mac CAI, Mac Headers, off road h, 3 chamber flows, Crane ign. box, 3:73s, Art Carr AOD & 2600 converter |
![]() |
![]() |
![]() |
#5 |
Registered Member
Join Date: Oct 2000
Location: ~Columbus~GA~31909~
Posts: 156
|
![]() THX-- billheis
I am going to try a test an autometer tech suggested to see how the gauge responds. I hope it isn't the pump ![]() ![]()
__________________
Mike Blown~AOD'ed~331~ T-top~ 86GT Check out car on my page here ------ > ~~My 86GT T-top ~~ |
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
fuel gauge install | GhettoPop | Windsor Power | 4 | 01-23-2004 01:41 PM |
Fuel Gauge Problem? | Philossifer | Windsor Power | 9 | 08-23-2003 10:08 AM |
fuel filter/gas gauge | Lonzo | Classic Mustangs | 1 | 07-30-2002 10:33 AM |
Electrical Fuel Problems HELP!! | Tony91LX | Windsor Power | 2 | 04-30-2002 09:07 AM |
Fuel Gauge install questions | Chipdog | Windsor Power | 0 | 08-12-2001 07:06 PM |