Emissions legal cams??

92Rustang · 03-27-2001, 08:48 PM

I'm looking for a cam that will pass IL emissions? I'm thinking about the E303, but I'm not sure. I would like a little more HP out of it.Thanks for the help. Oh I will also be going with the gt-40p's or windsor Jr.and a new short block.

------------------
Check my site for mod
www.fordmustanggt.com

93CobraR · 03-27-2001, 09:13 PM

If I were you I would check into the Crane Compucam 2031, mine goes in next week... I'll let you know how it works...

------------------
87 GT, 4 inch cowl hood,17x9 Cobra R's/255/45's,GT-40 heads,long tubes headers,h-pipe,Flows,BBK cold air, Mass air,70mm MAF, 1.7's, 1" spacer,underdrive pulleys,Pro 5.0, King Cobra, Adj. fuel Reg., Lakewood Lift Bars,50/50's,subframes, 4.10's.
Best time 12.96
Best MPH 103.42
Best 60' 1.695

Visit my site at:
http://www.geocities.com/cobrar93_2000/MyPage.html

stangbang · 03-27-2001, 09:24 PM

As long as the cam has little or no overlap you should be ok with the emissions.I passed the ohio test with the holley systemax II cam which is supposedly not emissions legal.

03-27-2001, 08:48 PM	#1
92Rustang Registered Member Join Date: Feb 1999 Location: Smithton, IL, US Posts: 215	Emissions legal cams?? I'm looking for a cam that will pass IL emissions? I'm thinking about the E303, but I'm not sure. I would like a little more HP out of it.Thanks for the help. Oh I will also be going with the gt-40p's or windsor Jr.and a new short block. ------------------ Check my site for mod www.fordmustanggt.com

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
50 state smog legal cams...	JBeryleC	Modular Madness	5	06-09-2004 09:30 PM
AFR 165's emissions legal vs. non emissions legal	dragstang86	Windsor Power	1	12-11-2002 01:20 PM
legal nitrous kit??	dragstang86	Windsor Power	2	10-01-2002 08:44 AM
An effective chip for a emissions legal stroker??	Stang_ROTY	Windsor Power	0	05-22-2001 09:07 PM
Are 347 & 393 strokers emissions legal??	Stang_ROTY	Windsor Power	6	05-08-2001 08:18 PM

03-27-2001, 09:13 PM	#2
93CobraR Registered Member Join Date: Oct 1999 Location: Cincinnati, Ohio Posts: 1,575	If I were you I would check into the Crane Compucam 2031, mine goes in next week... I'll let you know how it works... ------------------ 87 GT, 4 inch cowl hood,17x9 Cobra R's/255/45's,GT-40 heads,long tubes headers,h-pipe,Flows,BBK cold air, Mass air,70mm MAF, 1.7's, 1" spacer,underdrive pulleys,Pro 5.0, King Cobra, Adj. fuel Reg., Lakewood Lift Bars,50/50's,subframes, 4.10's. Best time 12.96 Best MPH 103.42 Best 60' 1.695 Visit my site at: http://www.geocities.com/cobrar93_2000/MyPage.html

03-27-2001, 09:24 PM	#3
stangbang Registered Member Join Date: Oct 1999 Location: brunswick,ohio Posts: 135	As long as the cam has little or no overlap you should be ok with the emissions.I passed the ohio test with the holley systemax II cam which is supposedly not emissions legal.