MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Tech > Windsor Power
Register FAQ Members List Calendar Mark Forums Read

Notices


Reply
 
Thread Tools Rate Thread Display Modes
Old 07-01-2009, 12:47 PM   #1
ekseabolt
Registered Member
 
Join Date: Jul 2009
Posts: 2
Default engine buid help

I build Cat engines at a dealer. New to car fuel inj. build


Here's what I have,
302 roller block bored .030
Gt-40 heads from 93 lightning
E303 cam
1.72 crane rollers
Edlebrock performer intake
Stock 19lb injectors
Flat top forged speed-pro pistons
70mm edelbrock throttle body
70mm MAF

My question is on the fuel side, are the 19lb injectors enough?
and will the stock vacuum operated fuel regulator work or should I upgrade to a aftermarket adj one.

Also does this combo sound OK.
I've never built up a fuel injected gas engine , just going off advice from co-workers
ekseabolt is offline   Reply With Quote
Old 09-13-2009, 11:05 PM   #2
Carl79
Registered Member
 
Join Date: May 2009
Posts: 3
Default Re: engine buid help

I'd go with 24lb injectors to be on the safe side... you can get a used set for relatively cheap.
Carl79 is offline   Reply With Quote
Reply


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Bolts for engine to engine stand?? DemonGT Windsor Power 8 04-15-2003 10:16 AM
Need to pull the engine, how to remove the engine mounts? mustang928 Windsor Power 5 07-17-2001 04:45 PM


All times are GMT -5. The time now is 01:18 PM.


SEARCH