Before I get into all that, could the EGR be causing this? I am not running the stock H pipe so I have the EGR blocked off both in the back of the heads and between the upper and lower intake. I am still running the vacuum line to the EGR. Is there a proper way to block it off?
About the valves being adjusted to tightly, I turned the adjusting nut about 1/2 turn past zero lash and I had about 1.15 (I believe) inches between the top of the guide plate and the middle of the rocker roller which is I believe what trick flow specifies.
thanks in advance
__________________
96 Cobra - a bit too stock. 14.0 @ 101
|