Engine Over REVs on its own!!!
My problem is this: Sometimes when I shift between 5300-6000RPM the moment I push the clutch in, the engine flares beyond 6500 (off the gauge) and hangs there, if I shift before 5000-5200 it will never do this. the only thing that stops the engine flare is turning off the engine, when I turn it back on again its fine.
What is strange it did this with a completely stock engine as well, before I put my combo listed below in there.
What would cause the throttle to conditionally stick only between those RPMs?
__________________
306,Hyper Pistons,Edelbrock Performer RPM "Typhoon" Intake (Ported), 1969 351W Heads (ported) 60cc combustion chambers machined to 50cc, 10:1 Compression Ratio, F-303 Cam, Harland Sharp 1.6 Ratio Roller Rockers, A9L ECU, 70MM Cobra MAF, 24lb/hr Injectors, MAC Equal Length Headers, MAC Offroad H-Pipe with Flowmaster Mufflers, 3.55 Posi Rearend...dreaming of 12s, need to run it
|