enough fuel for blower?

Skywalkr57 · 06-08-2002, 10:48 AM

im looking to get a S/C with a small amount of boost (probably 6lbs) looking at my current fuel setup do you think i have enough to power that, plus id probably get an fmu. how much to people usually gain from 6lbs? 60-70hp depending on combo? thanks
~matt

Skywalkr57 · 06-08-2002, 10:51 AM

also, does my cam work well with superchargers? i believe its got the same specs as the f303

91GTturbo · 06-08-2002, 11:41 AM

With your current setup you should be just fine, although you will definately need the fmu. I suggest trying to find some 30's, because with a blower you can never have enough fuel. As far as your hp estimates, your about right on. As far as the cam, I know the f cam makes a good supercharged cam, so you should be fine there too.

Skywalkr57 · 06-11-2002, 01:36 PM

any guesses what id run with 6#'s, my combo and traction?

91GTturbo · 06-11-2002, 04:16 PM

I'd say mid to low 12's with some traction.

1995MGTS · 06-12-2002, 02:42 PM

No sure what's in a Holley Systemax I package but when I was running my Powerdyne with only 6lbs of boost (only saw 4.5psi), 24# injectors, and the rest of the mods in my sig, I made 380.7rwhp/367.9rwtq SAE corrected. On a not so nice day (hot nasty day), I ran a best of 13.48@111.7

06-08-2002, 10:48 AM	#1
Skywalkr57 Registered Member Join Date: Dec 2000 Location: Rochester NY Posts: 21	enough fuel for blower? im looking to get a S/C with a small amount of boost (probably 6lbs) looking at my current fuel setup do you think i have enough to power that, plus id probably get an fmu. how much to people usually gain from 6lbs? 60-70hp depending on combo? thanks ~matt __________________ 1988 GT Remanufactured 302 Holley systemax I, cold air induction, 76mm C&L MAF conversion, underdrive pulleys, 24# injectors, 190lph fuel pump, equal length shorty headers, off road h-pipe, force II catback, PRO 5.0 shifter, fuel pressure oil pressure & water temperature gauge, crane valve springs

06-08-2002, 10:51 AM	#2
Skywalkr57 Registered Member Join Date: Dec 2000 Location: Rochester NY Posts: 21	also, does my cam work well with superchargers? i believe its got the same specs as the f303 __________________ 1988 GT Remanufactured 302 Holley systemax I, cold air induction, 76mm C&L MAF conversion, underdrive pulleys, 24# injectors, 190lph fuel pump, equal length shorty headers, off road h-pipe, force II catback, PRO 5.0 shifter, fuel pressure oil pressure & water temperature gauge, crane valve springs

06-08-2002, 11:41 AM	#3
91GTturbo Registered Member Join Date: May 2001 Location: Valdese, NC Posts: 361	With your current setup you should be just fine, although you will definately need the fmu. I suggest trying to find some 30's, because with a blower you can never have enough fuel. As far as your hp estimates, your about right on. As far as the cam, I know the f cam makes a good supercharged cam, so you should be fine there too. __________________ 91 single turbo vert

06-11-2002, 01:36 PM	#4
Skywalkr57 Registered Member Join Date: Dec 2000 Location: Rochester NY Posts: 21	any guesses what id run with 6#'s, my combo and traction? __________________ 1988 GT Remanufactured 302 Holley systemax I, cold air induction, 76mm C&L MAF conversion, underdrive pulleys, 24# injectors, 190lph fuel pump, equal length shorty headers, off road h-pipe, force II catback, PRO 5.0 shifter, fuel pressure oil pressure & water temperature gauge, crane valve springs

06-11-2002, 04:16 PM	#5
91GTturbo Registered Member Join Date: May 2001 Location: Valdese, NC Posts: 361	I'd say mid to low 12's with some traction. __________________ 91 single turbo vert

06-12-2002, 02:42 PM	#6
1995MGTS Registered Member Join Date: Mar 2001 Location: Chesapeake, VA USA Posts: 69	No sure what's in a Holley Systemax I package but when I was running my Powerdyne with only 6lbs of boost (only saw 4.5psi), 24# injectors, and the rest of the mods in my sig, I made 380.7rwhp/367.9rwtq SAE corrected. On a not so nice day (hot nasty day), I ran a best of 13.48@111.7 __________________ 2003 Redfire Cobra #5978 of 8394 -Pro-5.0 -DC cai -Steeda x-pipe w/cats -Steeda cat-back -Lightning pulley w/Afterburner 441rwhp/434rwtq SAE

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
fuel pressure issues	mustang98gt	Modular Madness	3	07-05-2003 10:43 PM
Fuel Problems...I think	silver_pilate	Windsor Power	15	05-31-2003 08:36 PM
Fuel pump relay questions	Big Bopper	Windsor Power	1	11-10-2002 10:20 PM
89 LX Fuel Problems	Ryan94GT	Small Ponies	0	08-19-2002 09:47 PM
Cartech/Aeromotive fuel system owners please read!!!!	Black306	Windsor Power	4	06-18-2001 03:39 PM