Exactly whats needed for install of o/r??
 

alright...im getting an o/r h-pipe. i need to know exactly whats needed. i have a 95 gt. everything is stock. i dont really need to know how to do it but rather what is needed. brackets?? if so, what kind and where is a good place to buy them? thanx a ton.....i just dont want to be unprepared when i get them installed. thanx a ton

Should be all inclusive. I've never had to buy anything, just bolts right up using the factory stuff.

RYAN

You won't need any brackets, but you may need a jack-I needed one for mine to lift the H-pipe up even with the cat-back after I got it into the hangars. Good luck

Get the O/R pipe into the hangers and EGR tube first then support the back of the pipe with a spare jack(hopefully you aren't using your jack while doing this install!) Place the jack under the crossover pipe. Jack it up level with the flow tubes going to the mufflers. Bolt up the pipe to the headers and then to the flowtubes. You can install the O2 sensors after you are finished if you don't want to risk breaking them. It is pretty easy, but it takes some patience if you are doing it by yourself. :cool: