MustangWorks.com : Ford Forums

MustangWorks.com : Ford Forums (http://forums.mustangworks.com/index.php)
-   Windsor Power (http://forums.mustangworks.com/forumdisplay.php?f=8)
-   -   Explorer intakes (http://forums.mustangworks.com/showthread.php?t=814)

Bangin Gears 02-04-2001 04:12 PM

Explorer intakes
 
I just bought a bone stock 93 GT, (Air Silencer still in place) in really good shape. And like any good mustang owner, I know that it won't last very long being completely stock. I was looking around getting pricing for the old "intake, cam, heads" upgrade, and I heard about the explorer intakes. I did some of my own research and found that the lower intake was GT-40, and the upper was similar to a cobra as far as performance. My question is, is it true? And what, if any, mods do you have to do to get it under the hood? Any information I get would be useful as I plan to do the swap myself. Thnx

withamc 02-04-2001 11:19 PM

Yes it is true. I had one on mine, but I bought one that did not have EGR that worked with the Mustang. You will also have to drill and tap for the ACT sensor. I ended up putting a Cobra on mine simply because I wanted it to be smog legal. If you don't care about the smog, I'll give you a deal on mine with a 65mm EGR spacer. E-mail me if you're interested. If you're looking for one with EGR, I think it's 96 and later, but I'm not sure.

------------------
86 GT, GT40P heads, Cobra cam, 1.7 RR's, Cobra intake, 65mm TB, 73mm Vortech, 24# injectors, MAC GT40P headers, 2-1/2" BBK H-pipe (w/cats), Flowmasters, 3.55s.

Skankin 02-05-2001 01:44 PM

The new Mac intake will be a deal at $299... I think it'll be available in May?

Bangin Gears 02-06-2001 12:16 AM

Hey thanx for the reply's. I would be interested in your used intake, however im in Ca so emissions is a must. Sorry, appreciate it though.

withamc 02-06-2001 01:24 AM

Yep, me too. That's why I bought the Cobra.

fiveohpatrol 02-06-2001 09:38 AM

withamc, i may be interested in your explorer, im not worried about emissions because we have no checks here. as it sits does it need any modifications to make it fit? e-mail me if you wanna get rid of it

------------------
88 Notchback 5.0, 3.73's, pulleys, BBK headers, off-road H-pipe, flowmasters, subframe connectors, 65mm TB, shift kit, March ram air kit, motorsport wires, MSD coil, upper and lower control arms, 155lph fuel pump, cheap 2800 stall, Crane Adj.FPR, best time- 13.99@99.75, not yet tested times after 1.7RR install


http://www.mustangworks.com/mustangs...g739-slot2.jpg

withamc 02-10-2001 01:25 AM

fiveohpatrol - I've tried e-mailing you. For some reason my mail server keeps kicking your address back. Read your private messages.


All times are GMT -5. The time now is 08:26 AM.