Fel-Pro 1250 gasket match to E7 intake ports ???

cojonepony · 01-30-2001, 11:06 PM

How closely does the Fel-Pro #1250 gasket match up to E7 intake ports? Does this require excessive material removal?

ponypower · 01-31-2001, 04:57 AM

i am using 1250's on my worked E7's, and there is no way you could remove enough of the port without busting through in numerous points. it is a big a** gasket.
good luck

------------------
90 LX, 4.99/5.10 custom cam, G&M prepped E7's, cobra u/l, 77 mm meter, 70 mm tb, mac longtubes, and h-pipe, crank pulley, cold air, kirban afpr (38), 19lb inj, PI STALLION 2800 stall, 4.10, b&m shiftkit, 26'' slick.
PonyPower
<A HREF="http://www.mustangworks.com/cgi-bin/ViewIt.cgi?http://www.mustangworks.com/cgi-bin/moi-display.cgi?269" TARGET=_blank>1990
Mustang LX</A>

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
OIL IN INTAKE almost sure from 'pcv'	QUIN	Windsor Power	8	03-09-2001 01:58 PM
Is the true about Edelbrock heads with TFS intake?	gt93mustang	Windsor Power	14	03-06-2001 07:01 PM
New MAC intake?	gt93mustang	Windsor Power	19	01-22-2001 03:33 PM
does gt40 intake work with sn95?	daz95gt	Windsor Power	8	01-13-2001 08:20 AM
Intake runner polishing/smoothing	AxemanZZ	Windsor Power	16	01-05-2001 02:40 PM

01-30-2001, 11:06 PM	#1
cojonepony Registered Member Join Date: Feb 2000 Posts: 132	Fel-Pro 1250 gasket match to E7 intake ports ??? How closely does the Fel-Pro #1250 gasket match up to E7 intake ports? Does this require excessive material removal?

01-31-2001, 04:57 AM	#2
ponypower Registered Member Join Date: Mar 1999 Location: Fayetteville, NC Posts: 206	i am using 1250's on my worked E7's, and there is no way you could remove enough of the port without busting through in numerous points. it is a big a gasket. good luck ------------------ 90 LX, 4.99/5.10 custom cam, G&M prepped E7's, cobra u/l, 77 mm meter, 70 mm tb, mac longtubes, and h-pipe, crank pulley, cold air, kirban afpr (38), 19lb inj, PI STALLION 2800 stall, 4.10, b&m shiftkit, 26'' slick. PonyPower** <A HREF="http://www.mustangworks.com/cgi-bin/ViewIt.cgi?http://www.mustangworks.com/cgi-bin/moi-display.cgi?269" TARGET=_blank>1990 Mustang LX</A>