![]() |
Fastest 1/4 ET's
I own a 90 GT with b303, 70mmTB, 1.7's, pullies, and i ran a 13.809@100mph with 2.73's.
Has anyone run faster than this(of course someone has) with a similar setup especially with 2.73's? |
stock heads, cam, intake, no portwork, and an aod 13.42 (bolt ons)
friends All stock 90 gt 13.90 another friends 5 spd modded like mine 13.28 friends 96 gt ran 13.60 when it was 2 weeks old... and other lesser freak cars ------------------ My slo aod- 3.73s, pullies, flowmasters, h-pipe, bbk cold air, and 13.42 in the 1/4 @ 103 mph |
I ran a few 13.70's with flows, exhaust, pullies, TB, 73mm MAF and a crane ignition with 2.73's...but it was around 99
------------------ Dustin 89 GT(Saleen Clone) 392 rwhp UNTUNED(TFS Intake, spacer,Heads and #2 cam, BD-11A 9#(only boosting 6???WTF),1.6 rr's,BBK 70mm TB,FMS 70mm MAF,MSD 6BTM,FMS 9mm wires,BBK longtubes and H-Pipe,American Thunder cat back,3.55 lots more... 12.564@118.49 on street tires is my best so far. Still untuned |
I ran 13.0s with stock heads, cam and intake. All I had was gears and exhaust.
------------------ 87 GT, 4 inch cowl hood,17x9 Cobra R's/255/45's,GT-40 heads,long tubes headers,h-pipe,Flows,BBK cold air, Mass air,70mm MAF, 1.7's, 1" spacer,underdrive pulleys,Pro 5.0, King Cobra, Adj. fuel Reg., Lakewood Lift Bars,50/50's,subframes, 4.10's. Best time 12.96 Best MPH 103.42 Best 60' 1.695 Visit my site at: http://www.geocities.com/cobrar93_2000/MyPage.html [This message has been edited by 93CobraR (edited 05-22-2001).] |
Hey 93CobraR
I saw on your website you have 20 degrees timing. whats up with that? |
my 93 ex cop car runs 14.3's at 4000 ft with 3.55's and flows.but the trans shot and I have to granny shift. otherwise its completly stock with 140k miles on it. Never been abused though.At least that's what I was told!
|
Wow my car is slow
------------------ 95 Mustang gt tfs stage1 cam,MSD distributor,MSD Coil,Ram air,Underdrives,BBK shorties,BBK off road H pipe,Flowmaster 2 chamber exhaust,Hypertech chip,4.10 gears,///14.28@94.8 2.14 60ft launching at 1500 Rpm before cam and timing adv and tires Status,still hates his car |
I ran a 14.26@97mph with just 1.7's and pullies.
|
My friends 89 LX vert ran a 15 flat. He has BBK cold air intake,65mm TB, edlebrock performer intake, B303 cam, FMS headers, Off road H-pipe, no cats, dumps, 3.73 gears, rebuilt T-5, and I think an upgraded mass air. It was his first time at the track and hasn't ran it since but he's been driving a stick since he started driving. The car was werecked a while back also then fixed. I was expecting low 13's or high ones with a bad run but 15 flat is rediculous. I haven't gotten to see how well he drives it let alone been in it therefore I'm not sure how well the car feels.
------------------ 67'fastback-Edelbrock carb,intake,cam,valve springs.Rhode lifters, CompCam rocker arms, windage tray,cerama coated headers,dual flows with H-pipe, modded c-4,tci stall converter,perma cool electric fan,aluminum water pump,griffen aluminum radiator,accel 8.8 cable,wide cap distriburator,magnetic pick up,v-matic hurst shifter,edelbrock performer nitrous, carter electric fuel pump,ignitor coil,solid motor mounts,magna racing suspension,poly urathane bushings,under rider traction bars, comp. eng. s |
Quote:
|
All times are GMT -5. The time now is 02:02 AM. |