Fender Decals

GodStang · 02-17-2002, 09:40 PM

On the side of the 1994-1998 mustangs there are emblems. Some are horses some say GT some are Cobras. Yall know that so here is my question how do you remove them. Is it stickers or what?

fiveohpatrol · 02-17-2002, 11:26 PM

Get some 3M adhesive remover, a razor blade and a steady hand.

They have pretty strong double sided tape holding them on. They MIGHT also have plastic prongs in them to help line them on on install, but im not sure. mine didn't, but SN95's may

DZEE'S LX · 02-18-2002, 12:22 AM

You can also try heat.

Carefully use a heat gun, or steal a high heat blow dryer from the bathroom, to heat up the adhesive.

If you are careful, and if you have good paint, it should come off without leaving marks.

BTW if your fender has ever been repainted make sure that the emblem was taken off for the repaint. If the emblem was taped you will have a nasty outline.

Dan

02-17-2002, 09:40 PM	#1
GodStang College Stanger Join Date: May 1999 Location: Aiken,south carolina, usa Posts: 1,097	Fender Decals On the side of the 1994-1998 mustangs there are emblems. Some are horses some say GT some are Cobras. Yall know that so here is my question how do you remove them. Is it stickers or what? __________________ 2003 Sonic Blue Cobra

02-17-2002, 11:26 PM	#2
fiveohpatrol I'd rather be basketweaving Join Date: Feb 2000 Location: Indianapolis Posts: 2,551	Get some 3M adhesive remover, a razor blade and a steady hand. They have pretty strong double sided tape holding them on. They MIGHT also have plastic prongs in them to help line them on on install, but im not sure. mine didn't, but SN95's may __________________ NMRA O/C 9516 NA pumpgas stickshift 347 10.65@125.6, 6.73@100, 1.41 60ft

02-18-2002, 12:22 AM	#3
DZEE'S LX Registered Member Join Date: Jan 2001 Location: Salt Lake City Posts: 117	You can also try heat. Carefully use a heat gun, or steal a high heat blow dryer from the bathroom, to heat up the adhesive. If you are careful, and if you have good paint, it should come off without leaving marks. BTW if your fender has ever been repainted make sure that the emblem was taken off for the repaint. If the emblem was taped you will have a nasty outline. Dan __________________ Spec Service (UHP), BFG G-Force KDW's, Turbo Coupe 3.55 rear w/disks, 73mm calipers, Stg 1 Twisted Wedges, TFS Street Intake, 70mm TB, E cam, Crane 1.7's, Aeromotive FPR, BBK 1 5/8 shorties, elec fan, FMS Al Radiator, Moroso Wires, Kenne Bell Ramair, March pulleys, Race Magnums, 190 lph Walbro, FMS Al Dshaft, D/S loop, MM 4point rollbar, FMS C spngs, strut tower brace, Tokico Illuminas, Prothane bushings, MM Lwr Conrol Arms, KB welded subs, Cervini Mach 1 hood/valence/side skirts/wing/airdam.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
American Flag Decals???	SCOTTLT79	Windsor Power	0	12-25-2001 11:00 AM
are 92 and 93 fender wells bigger like the fender?	fantozi	Windsor Power	1	09-28-2001 11:56 PM
New MustangWorks.com Decals Now Available	StangFlyer	Blue Oval Lounge	16	08-18-2001 06:07 AM
Rolled fender lips?	autoX	Windsor Power	8	06-27-2001 04:00 PM
'87-'90 inner fender vs. '91-93' Inner fender	RMARIANI	Windsor Power	9	06-23-2001 08:09 PM