© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
|
10-08-2001, 04:21 PM | #1 |
Registered Member
Join Date: Jan 1999
Location: Gaithersburg, Md 20878
Posts: 21
|
Finally a member of the 11 sec club...
Well, I finally did it. I became a member of the 11 sec club. The weather was somewhere in the high 50s low 60s along with a pretty strong head wind ~10 to 20 MPHs. The track conditions were not as good as they have been in the past, mustering only a best 60ft time of 1.67 and worst of 1.92. I had 7 runs total, 12.24, 12.14, 12.15, 12.03, 12.05, 12.32 and my best 11.98 with a 12.00 dial in time. My MPH was down alittle from the past only getting to 111.xx to 113.00. I was pretty happy with my results for the day. All last week I was trying to get some jets for my nitrous system to jet it up to a 100 shot but couldn't find any at local speed shops so I kept it at a 75 shot. Well I thought I'd share my results with all of you.
Thanks ------------------ Bill Duke My Coupe 12.68@107.6 N/A 12.05@114.8 W/N20 75 shot |
10-08-2001, 04:31 PM | #2 |
Don Corlione
Join Date: Jun 2001
Location: Omaha NE USA
Posts: 491
|
Nice times.
Someday I'll find the 11s. ------------------ Eric - 89 Mustang LX coupe 302 - Cobra Intake - GT40p heads - TFS stage 1 cam - FRPP 1.6 roller rockers - Naturally Aspirated 3:73 gears - KYB shocks and struts - Eibach springs - HPM Mega-bite Jr lower control arms - HPM upper control arms |
10-08-2001, 04:32 PM | #3 |
Registered Member
Join Date: Jun 1999
Location: Walker, MI, USA
Posts: 1,202
|
Cool!!! What heads you have on there???
------------------ 14.28@103.0 on a G-Tech Engine: Steal Mounts, Under drive pulleys, K&N, Home ported Lower Intake, No power steering, No A/C Drive Train: 3.55, T-5z, Real power STUFF I Have and will put some time: Mac cold intake, 70MM TB, Valve covers (COOL ONES)255 Fuel pump NOS Dry 75HP, AFR 165 58cc, GT-40 Intake. Next to get: Rocker Arms,Cam,Injectors 24, What might I need???See It at www.computerconquest.com |
10-08-2001, 04:45 PM | #4 |
Guest
Posts: n/a
|
I've been knocking on the door for a while now.......but, realistically I think I'm a year away ! Nice times........sometimes I wish I could just "dial in"!
------------------ '90 LX 5.0;12K original miles;FMS 3.55 gears; March pulleys;Edelbrock Performer Heads;BBK 1 5/8" equal length shorties;MSD 6AL ignition w/ blaster 2 coil;FMS E303 cam;Pro-M 75mm MAF;BBK 70mm TB; Eibach drag-launch spring kit;Southside weld-on subs;9" K&N cone filter charger;Hurst shifter;Cervini 3" turbo hood;A/C delete;gutted cats;2 chamber Flomasters;Corbeau racing seats;FMS 30# injectors;JMS custom chip;Holley 190lb fp;TFS track heat intake (12.299 @ 113mph w/ a 1.78 60') ....soon to be b |
10-08-2001, 05:09 PM | #5 |
Registered Member
Join Date: Nov 2000
Location: Maryland
Posts: 123
|
Congratulations! I was there also on Sun. Not too good for me. I broke (tranny) in the second round of eliminations for ETK. I guess I'm done for the year.
------------------ '93 GT Conv. TFS Twisted Wedge Heads, Cobra Intake, Lunati Cam, 24lb inj.,Pro-M 80 mm MAF 12.80 @ 108.13 mph w/1.80sec 60ft |
10-08-2001, 05:33 PM | #6 |
Registered Member
Join Date: Jan 1999
Location: Gaithersburg, Md 20878
Posts: 21
|
Thanks everyone.
Stang Runner- Im running out of the box Edelbrock 6037s. Ajstang- What color is your stang? I was there on Sunday also. ------------------ Bill Duke My Coupe 12.68@107.6 N/A 12.05@114.8 W/N20 75 shot |
10-09-2001, 10:38 AM | #7 |
Procharged!
Join Date: May 1999
Location: Hanover, PA
Posts: 1,539
|
Hey Congrats Bill!
Im was there Saturday, I won the Heads Up Class I was in B1. We had similar conditions on Staurday, terrible head wind and it was around 60degrees, my mph was about 4-5 off all day. I did manage to go 12.18 @ 108.3 on a 1.64 60ft, really had to heat the ET STREETS to get them to hook. I know if I had the mph like I normally run I would have gotten my first 11..so close still. When are you planning to head back to a local track? Street Night is at Mason on Saturday? Andy's car is a nice clean Black vert, he's went 12's before busting the Pressure Plate. Andy I Guess you'll be swapping all to the notch a few months early? I think it was just the pressure palte the T-5 may be fine, won't really know till you drop it out. ------------------ Check Out My Site 91GT,Holley SysteMAX II Kit-Heads 2.02" x 1.60" port matched to a 1262,Anderson N-61,24#,76mm C&L,Full MAC, No A/C or PS or emissions, 12" K&N Filter,RNH PERFORMANCE Ram Air,Ron Davis Radiator,Full Suspension, SPEC stage III clutch, Lakewood SFI bell, S&W 8pt "X" brace,JAZ seats,3:73's,Welds..etc,4:30's and 31 splines coming very soon! [b]12.16 @ 113.5, 1.78 60ft..no traction in the 90 degree |
10-09-2001, 10:50 AM | #8 |
Registered Member
Join Date: Sep 2001
Location: San Antonio,TX
Posts: 9
|
WOW CONGRATS
I JUST CANT WAIT TO TAKE MY CAR OUT TO THE TRACK TO FINALLY SEE WHAT IT CAN DO OR IF IT CAN DO ANYTHING. |
10-09-2001, 10:53 AM | #9 |
Registered Member
Join Date: Sep 2001
Location: San Antonio,TX
Posts: 9
|
WOW CONGRATS
I JUST CANT WAIT TO TAKE MY CAR OUT TO THE TRACK TO FINALLY SEE WHAT IT CAN DO OR IF IT CAN DO ANYTHING. |
10-09-2001, 01:53 PM | #10 |
Registered Member
Join Date: Jan 1999
Location: Gaithersburg, Md 20878
Posts: 21
|
Hey Rick. Congrats on the big win on Saturday. Wish I could have made it then.
Not sure when I'll be running again if any this year. Take care ------------------ Bill Duke My Coupe 12.68@107.6 N/A Best ET 11.98 |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Club Devine | Poseidon | Modular Madness | 2 | 12-19-2002 09:39 PM |
Car club for all? | Tod | Blue Oval Lounge | 5 | 04-14-2002 12:18 PM |
S.Fla Stangers...Interested in Joining a Club? | SprchrgdPony | Blue Oval Lounge | 0 | 03-24-2002 06:46 PM |
S.Fla Stangers...Interested in Joining a Club? | SprchrgdPony | Ford Show & Go | 0 | 03-10-2002 06:32 PM |
Newest member of the NA 12 second club!!! | Mustang92 | Modular Madness | 14 | 02-15-2001 07:31 PM |