first time at track with new setup
Well my best time was 11.1 at 123mph with a 1.5 60ft. I need to ditch my lowering springs because i could not hook at the line, and I need to get my lower intake to match up with my heads. It is off 3/16 on the top and bottom of the ports.
Just from moving my fuel pressure from 36psi to 42 I picked up 3 tenths. I am going to test out some spacers on my intake trying to raise the lower so it will match the ports on the heads, and I will mess with the fuel and timing some more. Once I get all the little things worked out I might upgrade my A-trim to T-trim.
------------------
Blown 347 W/Canfield heads, solid roller cam, track times this spring mid 10's or bust
93lx 5.0 daily driver
|