MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Tech > Windsor Power
Register FAQ Members List Calendar

Notices


Reply
 
Thread Tools Rate Thread Display Modes
Old 11-15-2003, 08:07 PM   #1
mak375
Registered Member
 
Join Date: Nov 2001
Location: State College, PA
Posts: 104
Default Fixing the cobra computer problem

I have heard from alot of people that the 94 cobra has a bad computer. I was wondering what options i have to fix it. So far all i have heard is that i can put an aol A9L in it that will cost like 100-200 but i will need a harness for it that costs like 400 more. 600 sounds like it is more expensive than what the swap is worth. Also i have heard you can have a chip made that will fix it, but i still plan on doing some more stuff to my car, and i dont want to have to get another chip later on. Are there any other options? or is the swap really worth $600?
__________________
blk 94 cobra 5spd 3.73 gears
steeda tri-ax, flowmaster catback, bassani x-pipe w/ high flow cats, MAC headers, ported and polished intake, trick flow twisted wedge heads, e303 cam, rear upper and lower control arms cold air induction w/ k&n air filter subframe connectors, underdrive pullies, MT ET streets, clear corners, chrome cobra r wheels
mak375 is offline   Reply With Quote
Old 11-15-2003, 11:36 PM   #2
andy669
Registered Member
 
andy669's Avatar
 
Join Date: Jan 2001
Location: Moline Il
Posts: 901
Default

I think chips are going for around $400 now, but it will be well worth it on your car. After you do more mods you can send the chip back to have it reburnt for a minor charge. Click here for the best mail-order chips available.

Andy
__________________
88 coupe

91 LX NMRA Pure Street 5120
andy669 is offline   Reply With Quote
Old 11-16-2003, 11:35 AM   #3
srv1
Get down.....
 
srv1's Avatar
 
Join Date: Apr 2001
Location: Room 103
Posts: 2,095
Default

I have a 93 Cobra computer is you need one. I also heard about the A9L swap, but you have to swap harness as well like Andy said.

PM me if you are interested.

James
__________________
Cobra brakes are on! Finally.....
------------------------------------------------
srv1 is offline   Reply With Quote
Old 11-17-2003, 08:34 AM   #4
Casper5.0
Registered Member
 
Casper5.0's Avatar
 
Join Date: Jun 2000
Location: Stillwater, OK
Posts: 107
Default

You could get an EEC tuner or twEECer then you can tune it yourself anytime you change your combo. There is a bit of a learning curve but there's a real nice group on yahoo that has tons of info. I believe the EEC tuner is around $400, you can go to www. eec-tuner.com and check it out. I gained 3 mph in the quarter in just one night at the track with mine as well as sorting out my idle issues.
__________________
94 cobra, steeda tri-ax, bbk longtubes, dr. gas x pipe, eec tuner, ultra flo's, 65 mm tb, underdrives, 75 mm MAF, homemade CAI, steeda #19 cam, Steeda LCA's, 3.73's, subframes

13.7 @ 103.03 before cam and gears
Casper5.0 is offline   Reply With Quote
Old 11-21-2003, 12:14 AM   #5
jrgoffin
Registered Member
 
Join Date: May 2002
Location: The Midwest
Posts: 79
Default

I don't race my car, but I have the '93 Cobra computer. MAF, and injectors. I have hammered this thing and been up to triple digit speeds plenty of times and can't find anything that indicates any less performance out of these computers. If there is a timing retard, it is not noticeable, but the rev limiter is still there. Unless you are serious down to .01 seconds, then maybe it is worth diving in to. You are probably just as well off with a chip or the TwEECer as everyone mentioned. I'd sure like to get an old Crane Interceptor just to play with it and see what difference it makes!
__________________
'90 LX Too many mods...
Rear-Disc tech
jrgoffin is offline   Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Looking at a 1996 Cobra. What are the problem areas? cobrayankee Modular Madness 3 10-14-2003 02:46 PM
Cobra MAF Conversion kit toevil1 Windsor Power 7 09-13-2002 02:03 PM
Computer swap in 94 cobra mak375 Windsor Power 4 11-24-2001 02:37 AM
Stock computer VS Cobra computer skiwesser Windsor Power 14 03-19-2001 06:41 PM
GT computer in 94 cobra? Casper5.0 Windsor Power 2 02-08-2001 02:26 AM


All times are GMT -5. The time now is 09:28 PM.


SEARCH