MustangWorks.com : Ford Forums - View Single Post

bosco · 11-18-2001, 01:44 AM

I had the turn-down pipes made a month after i got the car. I did the same thing you did fiveohpatrol, i went to the local exhaust shop, had them make me some just like your, and theyve been sitting around in my trunk every since, about 9 months. there actually 3 inch pipes, about 10 inches long, real low profile cut, i have a friend with dumps that hang down a bout 2 inches, im waiting for them to get caught on a speed bump and rip his exhaust system out . What are the laws about the pipe, i dont know if its different for different states, but i heard that the pipe has to exit from under the car, what if i welded them at angle pointing outward, will that get by

11-18-2001, 01:44 AM	#6
bosco Registered Member Join Date: Nov 2001 Location: austin TX Posts: 115	I had the turn-down pipes made a month after i got the car. I did the same thing you did fiveohpatrol, i went to the local exhaust shop, had them make me some just like your, and theyve been sitting around in my trunk every since, about 9 months. there actually 3 inch pipes, about 10 inches long, real low profile cut, i have a friend with dumps that hang down a bout 2 inches, im waiting for them to get caught on a speed bump and rip his exhaust system out . What are the laws about the pipe, i dont know if its different for different states, but i heard that the pipe has to exit from under the car, what if i welded them at angle pointing outward, will that get by __________________ '87 coupe, 308, world product windsor jr. heads, comp cams 220@.050/.512 @110 deg., roller cam,crane full roller rockers, 4bbl 600cfm holly carb,1 inch spacer, wiend aluminum intake, pullies, msd distributer/ignition, 1 5/8 bbk shorties, off road h-pipe 2 chamber flows, 3.73 posi rear end, P.S.T control arms, steeda tri-ax shifter, t-5, auto meter guages, and more to come (hopefully )